What is the correct Hub bore????

Bayou2coma · 09-26-2007, 12:16 PM

I'm about to buy some wheels for my truck and and I wondering which hub bore is the right size. The wheels are KMC KM125 Backseat (Black S/S Lip) 18x9 one has hub bore = 108 and the other = 78.1

Which hub bore is the right size???

rhoppas · 10-02-2007, 06:44 AM

I believe I read somewhere that the Tacoma hub bore is 106mm.

Bayou2coma · 10-02-2007, 08:04 AM

Well, 108 should work right? Because I seen tacoma's with this rim before.

rhoppas · 10-02-2007, 03:03 PM

Probably not without additional parts. Check out the following thread...

http://www.tacomaworld.com/forum/whe...g-centric.html

Bayou2coma · 10-03-2007, 08:44 AM

Ok, I found:

Pro Comp Xtreme Alloy Series 7289
18x9, 6 on 5.5 Bolt Pattern; Backspace = 4.75 in.; Hub Centric = Yes; Max Load = 2200lbs; Offset = -6mm; Finish = Cast-Blast

Will these work? It don't say what size the hub bore is.

09-26-2007, 12:16 PM	#1
Bayou2coma Junior Member Joined: Jul 2007, #2121 Location: Lockport, LA Posts: 24	What is the correct Hub bore???? I'm about to buy some wheels for my truck and and I wondering which hub bore is the right size. The wheels are KMC KM125 Backseat (Black S/S Lip) 18x9 one has hub bore = 108 and the other = 78.1 Which hub bore is the right size??? __________________ Black 07' SR5 DC Long Bed 4x4 2.5" Bilstein Height Adjustable Front shocks. 1" Rear Block 265/70-17 BFGoodrich All-Terrain T/A KO's 17" Pro Comp Xtreme Alloy Series 8089's

10-02-2007, 08:04 AM	#3
Bayou2coma Junior Member Joined: Jul 2007, #2121 Location: Lockport, LA Posts: 24	Well, 108 should work right? Because I seen tacoma's with this rim before. __________________ Black 07' SR5 DC Long Bed 4x4 2.5" Bilstein Height Adjustable Front shocks. 1" Rear Block 265/70-17 BFGoodrich All-Terrain T/A KO's 17" Pro Comp Xtreme Alloy Series 8089's

10-03-2007, 08:44 AM	#5
Bayou2coma Junior Member Joined: Jul 2007, #2121 Location: Lockport, LA Posts: 24	Ok, I found: Pro Comp Xtreme Alloy Series 7289 18x9, 6 on 5.5 Bolt Pattern; Backspace = 4.75 in.; Hub Centric = Yes; Max Load = 2200lbs; Offset = -6mm; Finish = Cast-Blast Will these work? It don't say what size the hub bore is. __________________ Black 07' SR5 DC Long Bed 4x4 2.5" Bilstein Height Adjustable Front shocks. 1" Rear Block 265/70-17 BFGoodrich All-Terrain T/A KO's 17" Pro Comp Xtreme Alloy Series 8089's

Thread Tools	Search this Thread
Show Printable Version Email this Page	Search this Thread: Advanced Search
Display Modes
Linear Mode Switch to Hybrid Mode Switch to Threaded Mode

Similar Threads
Thread	Thread Starter	Forum	Replies	Last Post
After market wheel bore sizes	chad68	Wheels & Tires	4	11-23-2007 06:01 PM
Correct Wheel/Tire Balancing (LUG CENTRIC)	viprbomber	Wheels & Tires	26	09-28-2007 05:54 AM

10-02-2007, 06:44 AM	#2
rhoppas Northern Alliance Ally Joined: Aug 2007, #2564 Location: Topeka, KS Posts: 803 07 Double Cab V6 TRD Sport Tow 2007 Double Cab Automatic V6 Viper alarm, Hunter4x4 Bull Bar, 6" Pro Comp Off-Road lights, extra set of bed D-rings, Chrome exhaust tip, Metra Ipod/MP3 adapter, Garmin GPS, CarriageWorks grill, Maglite mounted to driver seat	I believe I read somewhere that the Tacoma hub bore is 106mm.

10-02-2007, 03:03 PM	#4
rhoppas Northern Alliance Ally Joined: Aug 2007, #2564 Location: Topeka, KS Posts: 803 07 Double Cab V6 TRD Sport Tow 2007 Double Cab Automatic V6 Viper alarm, Hunter4x4 Bull Bar, 6" Pro Comp Off-Road lights, extra set of bed D-rings, Chrome exhaust tip, Metra Ipod/MP3 adapter, Garmin GPS, CarriageWorks grill, Maglite mounted to driver seat	Probably not without additional parts. Check out the following thread... http://www.tacomaworld.com/forum/whe...g-centric.html