1st gen 285/75/16 frame rub solution

I have xd series enduro with terra grappler 285/75 and it rubs the frame at full lock. The shop was going to put wheel spacers but the lugs are to short. What options do I have? Do I just get longer lugs?

Regards

Eric

 

What lift/level kit are you running?
I am assuming its the style of the grapplers being more flat. I run bfg at's and don't have a rubbing issue since going with Ome nitrochargers.

 

I have the toytec ultimate lift.

Regards

Eric

 

What is the backspacing on your wheels?

 

4.5

 

I'd say buy some 1.25" spidertrax wheel spacers and you won't have any rubbing the frame at full lock. You will still have to trim the pinch weld like so:

http://www.expeditionswest.com/equipment/tacoma/bfg_mt_km.html

 

Thanks.

These?

spidertrax

So with the spacers it won't rub my frame, but now rub the pinch weld( it does not currently)
Regards

Eric

 

Yup, a little expensive but they are very high quality and the studs won't break on you like cheaper ones. Guys with long travel run these.

 

I have spidertrax and the are very well made. As said above not the cheapest but you don't want to skimp on spacers..

 

Thanks for the input gonna go with it, my poor frame is now bare on the drivers side so I'll prolly have to paint that after I put these on.

Regards

Eric

 

Nice truck. Lunar mist rules.....

 

Thanks, finally got around to givin her some love, she was abused for 10 years.

Do I need to get an alignment after I add the spacers?

Regards
Eric