Backspace offset 3in lift Wheels

BRP27 · 11-20-2009, 02:48 PM

http://www.tirepackage.com/Wheels/XD...PXD79568060300

I am planning on using these rims with 285/75/R16 BF Goodrich The backspace is 4.5 in, offset 0. Will 4.5 Backspace work? Searches say 4in or less and others say 4.5in will work. This link http://www.rims-n-tires.com/rt_carse...carMake=Toyota says these rims will work but does not mention backspace

16x8, 6 on 5.5 Bolt Pattern

Backspace 4.50 in.
Max Load = 2200lbs
Finish = Matte Black
Hubcentric = No
Offset = 0 mmh

First generation 04 Taco 4X4
Will 4.5 Backspace work? I cant find what I want with 4 in or less backspace. I dont want to change the UCAs. I have read that 4.5 BS will work and others say only 4 in BS or less is good. These rims are XD Series XD795 Hoss Wheel

Anyone want to stick there neck out? Thanks in advance

Drock42 · 11-21-2009, 09:17 AM

Here's a link to a guy running a different wheel, but same specs (according to wheelpros):

http://www.tacomaworld.com/forum/1st...eels-pics.html

http://www.wheelpros.com/browse.asp?...ted&section=AR

BRP27 · 11-21-2009, 03:37 PM

Thanks Drock42

SecretSquirrel · 11-21-2009, 03:48 PM

4.5" Backspacing is optimal...

Drock42 · 11-23-2009, 08:56 AM

Quote:

Originally Posted by BRP27

Thanks Drock42

Sure thing! Don't forget to post some pics once they're on!

sirsaechao · 11-23-2009, 11:14 AM

Worst case is the width of the tires will rub the UCA and you need wheel spacers. I suggest 4.25" or smaller if you go past 10.50"/stock width tires.

BRP27 · 11-23-2009, 02:10 PM

I am picking up the rims tommorow.Going with gloss black. I will mount the stock 265/70/R16's on them until they wear out. I may go with 265/ 75/R16 instead of the 285s but that decision will be later.

All of the 4.0 and 3.75 backspace rims were oldschool style.

11-20-2009, 02:48 PM	#1
BRP27 Super Senior Gold Member Joined: Oct 2009, #24381 Location: So far south in Texas my feet are in salt water Gender: Male Posts: 170 04 4X4 Tacoma SR5 2004 Access Cab Manual V6 3 in Ultimate ToyTec, set @ 3 in. AAL PINCH Weld Mod ( beat the pinch weld over inside the fender) Painted the pinch weld on bottom of cab Black	Backspace offset 3in lift Wheels http://www.tirepackage.com/Wheels/XD...PXD79568060300 I am planning on using these rims with 285/75/R16 BF Goodrich The backspace is 4.5 in, offset 0. Will 4.5 Backspace work? Searches say 4in or less and others say 4.5in will work. This link http://www.rims-n-tires.com/rt_carse...carMake=Toyota says these rims will work but does not mention backspace 16x8, 6 on 5.5 Bolt Pattern Backspace 4.50 in. Max Load = 2200lbs Finish = Matte Black Hubcentric = No Offset = 0 mmh First generation 04 Taco 4X4 Will 4.5 Backspace work? I cant find what I want with 4 in or less backspace. I dont want to change the UCAs. I have read that 4.5 BS will work and others say only 4 in BS or less is good. These rims are XD Series XD795 Hoss Wheel Anyone want to stick there neck out? Thanks in advance

11-21-2009, 03:48 PM	#4
SecretSquirrel ☆ Didn't send the E-mail, but see humor in it ☆ Name: «☆☆☆‡ Rich ‡☆☆☆» Joined: Jul 2008, #7806 Location: Wà££ÏÑGfØ®Ð, Þâ Gender: Dude Posts: 15,705 Founding member: Satoshi Club 2005 Double Cab Manual 4.0 OME885s with Bilstein 5100s up front, Allpro 10-leaf pack with Bilstein 5125s and u-bolt flip in back,Cooper 305 STT's on Moto Metals,Satoshi grille,K&N CAI,Carputer,AllPro Front Bumper,Tiregate	4.5" Backspacing is optimal... __________________ No TV and no beer makes Rich go something-something. Truck Pics.....TogetherWeServed Profile.....LinkedIn Profile Help a Wounded Warrior Operation First Response Is Part Of The Combined Federal Campaign!! CFC# is 15385

11-23-2009, 11:14 AM	#6
sirsaechao Senior Member Joined: May 2009, #17772 Location: Nor Cal Gender: Male Posts: 463 02 Tacoma SR5 TRD 3.4L 4X4 2002 Xtra Cab Automatic 5VZ FE To much to list...see sig for more...	Worst case is the width of the tires will rub the UCA and you need wheel spacers. I suggest 4.25" or smaller if you go past 10.50"/stock width tires. __________________ http://www.cardomain.com/ride/2907752

Thread Tools	Search this Thread
Show Printable Version Email this Page	Search this Thread: Advanced Search
Display Modes
Linear Mode Switch to Hybrid Mode Switch to Threaded Mode

Similar Threads
Thread	Thread Starter	Forum	Replies	Last Post
3in lift and tires done	GA1044	Suspension	10	02-16-2010 12:38 PM
required offset and backspacing on 3in lift	jmb1985	Wheels & Tires	26	09-29-2009 08:46 PM
3in lift	salquezada80	Suspension	14	02-04-2009 11:30 AM
35 mudders? 18in tires. 3in lift or 5in lift	Reflex242	Wheels & Tires	7	12-23-2008 09:57 AM
Backspace clearance w/ FJ Wheels	The Count	Wheels & Tires	0	05-02-2007 03:16 PM

11-21-2009, 09:17 AM	#2
Drock42 Member Name: Derek Joined: Aug 2009, #21142 Location: Albuquerque, NM Gender: Male Posts: 70 09 TRD Sport 4x4 2009 Double Cab Automatic 4.0 V6 Toytec Coilovers, LR UCAs, OME Dakar leafpacks w/5100s, 18" 951s, 285/60 TGs (6ply), Grillcraft MX upper & lower, Wet Okole seat covers, Rec-rac bike racks	Here's a link to a guy running a different wheel, but same specs (according to wheelpros): http://www.tacomaworld.com/forum/1st...eels-pics.html http://www.wheelpros.com/browse.asp?...ted&section=AR

11-21-2009, 03:37 PM	#3
BRP27 Super Senior Gold Member Joined: Oct 2009, #24381 Location: So far south in Texas my feet are in salt water Gender: Male Posts: 170 04 4X4 Tacoma SR5 2004 Access Cab Manual V6 3 in Ultimate ToyTec, set @ 3 in. AAL PINCH Weld Mod ( beat the pinch weld over inside the fender) Painted the pinch weld on bottom of cab Black	Thanks Drock42

11-23-2009, 02:10 PM	#7
BRP27 Super Senior Gold Member Joined: Oct 2009, #24381 Location: So far south in Texas my feet are in salt water Gender: Male Posts: 170 04 4X4 Tacoma SR5 2004 Access Cab Manual V6 3 in Ultimate ToyTec, set @ 3 in. AAL PINCH Weld Mod ( beat the pinch weld over inside the fender) Painted the pinch weld on bottom of cab Black	I am picking up the rims tommorow.Going with gloss black. I will mount the stock 265/70/R16's on them until they wear out. I may go with 265/ 75/R16 instead of the 285s but that decision will be later. All of the 4.0 and 3.75 backspace rims were oldschool style.