15'' to 16'' wheel swap? Need Help

I have a 99 reg cab 4x4 with 15x7 wheels. Just got 2.5'' coilovers w/ billys all around and 2'' aals in the rear. I want to run 32'' tires but dont want to go much wider than 10.5. After researching i found that there is no 32x10.5x15. What i did find is the 265x75x16 close to a 32x10.5x16.

My question is 'What kind of offset/backspacing would i need to clear all wheel components(calipers, spindle towers, upper ball joint etc...) on a 16x8 wheel and also have minimal rubbing.

Any knowledge or suggestions would be helpful.
Thanks Matt

 

A 4" to 4.5" backspacing would do fine...then you can run 265/75/16s. The 16s will fit no problem, you don't have to worry about your calipers and such...

Check this
http://www.tacomaworld.com/forum/tirecalc.php
"32/10.50/15 compared to a 265/75/16"

 

thanks for the info, i dident think the tire would rub, was just a little worried bout the wheel not seating right with incorrect bs of offset.

 

super swamper makes a 32/10.50/15