Tacoma World Forums

Tacoma World Forums (http://www.tacomaworld.com/forum/)
-   Wheels & Tires (http://www.tacomaworld.com/forum/wheels-tires/)
-   -   Stud length and Lug nuts on new rim (http://www.tacomaworld.com/forum/wheels-tires/222126-stud-length-lug-nuts-new-rim.html)

xyourlocaldjx 05-29-2012 05:42 PM

Stud length and Lug nuts on new rim
 
I tried a search and didnt come up with much so excuse me for posting another 951 thread =)

I test fit one and it seems okay since i'm using the spline lug nuts, but it's not the recommended length of bite. I think it's 1.5 times the diameter that should be threaded on?

moto metal 951 16x9 anyone using the stock studs for these rims? Or will i have to get longer ones

KPT 05-29-2012 05:49 PM

Wheel studs too short? What to do.

xyourlocaldjx 05-29-2012 06:14 PM

Quote:

Originally Posted by KPT (Post 5159320)

i was originally looking to figure out what exactly is "too short" but i read your post further and it had an example of the 951's. thanks. guess it wont be safe to ride on the stocks studs.

KPT 05-29-2012 06:15 PM

Quote:

Originally Posted by xyourlocaldjx (Post 5159472)
i was originally looking to figure out what exactly is "too short" but i read your post further and it had an example of the 951's. thanks. guess it wont be safe to ride on the stocks studs.

If you feel uneasy enough at it to ask, I'd just go ahead and be safe.

xyourlocaldjx 06-12-2012 08:00 PM

thanks guys! just ordered my set. much cheaper here http://www.123autoparts.com/searchit...lookfor=610463


All times are GMT -7. The time now is 01:34 AM.