fog light area mod

dmbfan73 · 09-08-2009, 02:27 PM

used "plasti dip" to paint the area black around the fog lights.

epa4wd · 09-08-2009, 02:35 PM

I like it, goes perfect with the black headlights

and I really like your wheels!

neslerrah · 09-08-2009, 02:38 PM

Great job! Looks great!

gunner76137 · 09-08-2009, 02:39 PM

I like it I had thought about doing that to mine but wasn't sure I'd like it with my yellow lens

ClemsonTacoma · 09-08-2009, 02:48 PM

I know that Plasti Dip probably took forever to dry

nad · 09-08-2009, 02:54 PM

did you make a custom grill for the bottom part on the bumper as well as your satoshi?

dmbfan73 · 09-08-2009, 03:48 PM

i just cut out the center section and used the mx lower grill and recesssed it

Quote:

Originally Posted by nad

did you make a custom grill for the bottom part on the bumper as well as your satoshi?

TightShirts · 09-09-2009, 10:34 AM

i think i'm going to have to do that to mine

branct06 · 09-09-2009, 11:06 AM

not bad at all but i have a black truck so not sure it will work too well on mine but good idea and looks great

Balboa · 09-10-2009, 06:52 PM

I like it. Looks great.

T-rev · 09-11-2009, 07:48 AM

Looks good! Is there a write-up for this yet?!

nad · 09-11-2009, 07:50 AM

i dont think there is much of one needed he just painted the inside of the light area, get some tape and some of the plasti dip that he used and paint away.

T-rev · 09-11-2009, 07:53 AM

Quote:

Originally Posted by nad

i dont think there is much of one needed he just painted the inside of the light area, get some tape and some of the plasti dip that he used and paint away.

No prep? Will it harm the paint? It can't be that easy, it never is

nad · 09-11-2009, 07:53 AM

good point well we will have to wait and c what he says

dmbfan73 · 09-11-2009, 11:06 AM

here's a quick write-up:
remove both fog lights and clean area to be painted (i used simple green)
tape off edge off fog light area ( i used some very thin tape that i bought from a hobby shop, it looks like pin striping.) then some wide blue painters tape around the thin tape.
1 can plasti dip, spray one fog light area at a time. as soon as you are done painting remove the tape, if you let the plasti dip dry and then pull off the tape, the paint will come off.
according to the directions on the can, dry time is 4 hours.
enjoy!

Quote:

Originally Posted by nad

good point well we will have to wait and c what he says

McJosh · 09-11-2009, 11:10 AM

That looks nice. I was holding out on putting in fog lights because I like the black that my bumper has but if I can do this then HELL YEAH!!!

T-rev · 09-12-2009, 01:28 AM

Quote:

Originally Posted by dmbfan73

here's a quick write-up:
remove both fog lights and clean area to be painted (i used simple green)
tape off edge off fog light area ( i used some very thin tape that i bought from a hobby shop, it looks like pin striping.) then some wide blue painters tape around the thin tape.
1 can plasti dip, spray one fog light area at a time. as soon as you are done painting remove the tape, if you let the plasti dip dry and then pull off the tape, the paint will come off.
according to the directions on the can, dry time is 4 hours.
enjoy!

Thanks for the quick write-up!

GodHatesUsAll · 10-12-2009, 05:36 PM

Between doin the fog area and doin the EVO mod, those are 2 ways to make ur truck look great! Good Job Bro

09-08-2009, 02:27 PM	#1
dmbfan73 Member Joined: Mar 2009, #14994 Location: vacaville, ca Gender: Male Posts: 46 06 x-r X-Runner Manual	fog light area mod used "plasti dip" to paint the area black around the fog lights.

09-08-2009, 02:35 PM	#2
epa4wd Senior Member Name: Eduardo Joined: Mar 2009, #14828 Gender: Male Posts: 404 09 Base Model A/T 4cyl 2wd 2009 Regular Cab Automatic 2.7L I4 Tinted Windows (40% all around), Freedom Tonneau Cover, OEM style Fog Lights, Coverking Seat Cover, OEM door sills, Leather shift knob	I like it, goes perfect with the black headlights and I really like your wheels! __________________ For lots of 5-Lugger Pics, check my gallery >Click Me<

09-08-2009, 02:38 PM	#3
neslerrah Bear Down! Name: Harrelsen Joined: Feb 2008, #4803 Location: Tucson, Arizona Age: 22 Gender: Male Posts: 4,201 '06 5 Lug, Reg. Cab, 2WD 2006 Regular Cab Manual 2.7L/I4 Secondary air filter removed, elbow mod, aFe Pro Dry S, BF Goodrich All Terrain TA KOs (31x10.5R15), American Racing Mojaves, Debadged, BHLM, Dome Light MOD (Blue), Scanguage II, Hella 500 behind Satoshi Grille, Bed Lights, Pioneer DEH-P6000UB and Speakers TS-G1642R, Sockmonkey Decals, Readylift 5-lug SST, Rear Shocks - Pro Comp P/N324515, Dynomax Super Turbo #17748	Great job! Looks great! __________________ My 5-lug build

09-08-2009, 02:39 PM	#4
gunner76137 Member Name: John Joined: Nov 2008, #10958 Location: Arlington Texas Gender: Male Posts: 37 speedway blue xrunner 2005 X-Runner Manual 4.0 L v6 Different tires and rim's, Xenon headlights and foglights,1200 watt amp, two 10 in. Kicker subs with neon light rings in a custom built enclosure,fog light mod,Jardine cat back exaust, Kool View cai, twoo set of tweaked ice neon underbodies	I like it I had thought about doing that to mine but wasn't sure I'd like it with my yellow lens __________________

09-08-2009, 02:54 PM	#6
nad WUNDERBAR!!! Name: Jordan Joined: May 2009, #17388 Location: Manitoba Canada Age: 23 Gender: Male Posts: 1,985 05 TRD Offroad SR5 Access Cab 4x4 6 SPD MT 2005 Access Cab Manual v6 TRD Seat Covers TRD Floor Mats 5100's @ 2.5 Custom Fabbed AAL Bike Mounts Satoshi Grill AFE CAI Blue Guages really loud exhaust that previous owner put on, not sure on what make	did you make a custom grill for the bottom part on the bumper as well as your satoshi? __________________ sig by cmack48

09-09-2009, 10:34 AM	#8
TightShirts Dos Tacos Joined: Sep 2008, #9447 Location: Phoenix... The Land of Lifted Trucks & Dirty Sluts Age: 24 Gender: Male Posts: 467 08 Rugged Trail & 97 4x4 3.4L 2008 Access Cab Automatic 4.0L V6 Tint, Clear Bra, White Grill w/Black Billet, Debadged, In-Dash DVD, 09 Led Tail Lights	i think i'm going to have to do that to mine __________________

09-09-2009, 11:06 AM	#9
branct06 Senior Member Joined: Jun 2008, #7489 Location: norcross Ga. and High Point Nc. Age: 20 Gender: Male Posts: 456 05 4x4 black sr5 long bed trd sport 2005 Double Cab Automatic 4.0 v6 super 40 flowmaster turned down before rear axle, k&n intake, ipod interface, 20% 3m tint all the way around, grill craft mx series grill with 2 hella 500 behind the grill, 2 55 watt halogens mounted on uws black low profile toolbox, 3'' toytec ultimate lift kit sitting on black xd monsters and 285/65/18 BFG A/T	not bad at all but i have a black truck so not sure it will work too well on mine but good idea and looks great

09-10-2009, 06:52 PM	#10
Balboa Member Joined: Apr 2009, #15604 Location: Dallas Gender: Male Posts: 74	I like it. Looks great.

09-11-2009, 07:48 AM	#11
T-rev Senior Member Joined: Apr 2008, #5837 Location: Scottsdale AZ Age: 17 Gender: Male Posts: 298 2008 Sport 4x4 2008 Double Cab Automatic 4.0L V6 BHLM, Billet Grill, Revtek 3", De-badged, Smoked tails, Flowmaster 50 series, Silverstar 9145 Fogs, 18x9 American Racing ATX Thug's, 285/65/18 Nitto TG	Looks good! Is there a write-up for this yet?!

09-11-2009, 07:50 AM	#12
nad WUNDERBAR!!! Name: Jordan Joined: May 2009, #17388 Location: Manitoba Canada Age: 23 Gender: Male Posts: 1,985 05 TRD Offroad SR5 Access Cab 4x4 6 SPD MT 2005 Access Cab Manual v6 TRD Seat Covers TRD Floor Mats 5100's @ 2.5 Custom Fabbed AAL Bike Mounts Satoshi Grill AFE CAI Blue Guages really loud exhaust that previous owner put on, not sure on what make	i dont think there is much of one needed he just painted the inside of the light area, get some tape and some of the plasti dip that he used and paint away. __________________ sig by cmack48

09-11-2009, 07:53 AM	#14
nad WUNDERBAR!!! Name: Jordan Joined: May 2009, #17388 Location: Manitoba Canada Age: 23 Gender: Male Posts: 1,985 05 TRD Offroad SR5 Access Cab 4x4 6 SPD MT 2005 Access Cab Manual v6 TRD Seat Covers TRD Floor Mats 5100's @ 2.5 Custom Fabbed AAL Bike Mounts Satoshi Grill AFE CAI Blue Guages really loud exhaust that previous owner put on, not sure on what make	good point well we will have to wait and c what he says __________________ sig by cmack48

09-11-2009, 11:10 AM	#16
McJosh El Cool Taco Name: Josh Joined: Jun 2009, #18621 Location: Chandler Age: 17 Gender: Guy Posts: 286 '05 5 lug BEAST! 2005 Regular Cab Automatic 2.7L new deck, 12" solo baric and amp, bigger BFG tires and pro comp wheels, tinted windows, satoshi grille, cowl hood, color matched front bumper and a chrome rear bumper. LoJack and Autopage alarm installed	That looks nice. I was holding out on putting in fog lights because I like the black that my bumper has but if I can do this then HELL YEAH!!! __________________ "Just wait till i put one on there and my taco turns into tacomusprime and destroys some shit." (WilsonPJ)

10-12-2009, 05:36 PM	#18
GodHatesUsAll Reign in Blood Joined: Oct 2009, #24126 Location: In My House Gender: Guy Posts: 22 BSP X 2005 X-Runner Manual 1GR-FE Yup	Between doin the fog area and doin the EVO mod, those are 2 ways to make ur truck look great! Good Job Bro

Thread Tools	Search this Thread
Show Printable Version Email this Page	Search this Thread: Advanced Search
Display Modes
Linear Mode Switch to Hybrid Mode Switch to Threaded Mode

Similar Threads
Thread	Thread Starter	Forum	Replies	Last Post
Fog Light Mod Help	vinster8	Lighting	5	06-07-2009 06:07 PM
Fog Light Mod	ballin2hard4u	Lighting	3	03-09-2009 05:02 PM
Fog Light Mod!	BigBacon	Lighting	18	12-28-2008 05:41 PM
Fog Light Mod	kristopherl	Lighting	6	03-14-2008 06:47 AM
Fog Light Mod	silvertaco408	2nd Gen. Tacomas	9	02-17-2008 04:40 PM