What Have You Done To Your 2nd Gen Tacoma Today?

http://www.theretrofitsource.com/accessories/silica-gel-moisture-packs-48681.html#.VQUIJ_lzRQc

I'm sure you can get them cheaper somewhere else. But I just stuff two of them between the bowl and housing where the housing cap is.

 

How? Details, please.

 

It was an aftermarket ebay, mirror and license plate camera combo. I think I paid 80 plus shipping. Attached camera power to the tail light reverse bulb.
I then tapped into power in the overhead console to power the mirror using an unused harness.

 

I'm assuming it's a wireless connection one? I'm looking to do the same thing with mine

 

No, it's wired. I ran the video cable along the frame following the other electrical looms to a plug under the seats on the driver's side. Then ran the cable up the pillar where the seat belt is and pulled it through to the overhead console. That was actually the easiest part. figuring out the electrical was the time consuming part for me.

 

Ohh I see. Would be for me too, I'm awful with that stuff.

 

Seems to me a new thread should be coming soon. Thanks for the info. I'll wait for precise instructions; with pics!

 

Pure sex right there. Nice truck.

 

Drove two hours North from Baltimore up to PA. Meet three guys all on the forum and bought this soft topper from one of them.

 

Sounds about like what I had to do. $20 camera and and $20 monitor and I've had a quality back up camera for months now that's wired to reverse and anytime. Man was wiring that correctly an interesting journey

 

I believe you are correct. The previous always took to dealer and followed all the maintenance intervals therefor I know I'm good until 90k. The guy gave a notebook the size of a telephone book. A bit excessive if you ask me but its a nice resource to have now.

 

Thank you!

 

Dropped of my rock sliders and rear bumper off with my Line-X guy. On my way out someone asks me about my truck and comments that I have some pretty big tires on there (265/75/16), I was trying not to laugh at him as I was thinking to myself I was just on TacomaWorld.com looking at the 37's thread and thinking I needed to at least get up to 35s!!!

This site is dangerous, haha

 

I've got mine in the same place

 

2x my super white turned to nasty tan color bc the clear wasn't thick enuff

 

Me too. Wish there were more Tacomas out here that aren't all driven by 70 year olds... haha

 

Added some dee zee nerf bars to my access cab. I"m not 100% happy with them, because I wanted them "higher", and closer to the body, but I'll run with them for now...

 

There is a fix for that. You need to order a set of these, puts them even with the rocker.

Like mine for now sliders en route.

 

Installed:

• Kahtec Technologies blinking smart stop delay version to third brake light (Kahtec),
• WeatherTech Digital Fit floor liners & front side window deflectors (Total Automotive Performance) - no fitment issues. Did a thorough cleaning of the interior before the floor liner install including an ArmorAll treatment.
• Clearview-Rearview Mirror Riser with Ram Ball (BirdDawg Industries),
• Cobra CDR820 drive-HD dash cam and hardwire kit (Amazon) - the field of view could be wider, but works well so far,
• "Horns on Fire" (Diaz Fabrications) - from the November 2014 production run - had to remove a small cast protrusion in the center of the grill to yield a flat surface before mounting, and
• Replacement fog housings (eBay) - after water removed the chrome from one of the housings lower sleeves due to a defective bulb seal

Need to give the truck a bath now if the rain holds off.