What Have You Done To Your 2nd Gen Tacoma Today?

LED gauge cluster swap by member emelianenkov in Massachusetts, will get more night pics:



White numbers/blue needles and different indicator LEDs for headlights, turn signals, and shifter.

The wire to the right is for my Ultragauge mx1.3

 

Admired it

 

Actually. It's fairly common practice to put some grease on the threads. The grease causes a hydraulic action of spreading the load of the torque evenly over the entire thread and if torqued properly will not allow it to come loose or move. And acts as a anti seize at the same time.

 

Could be grease slung from the driveshaft if you've recently greased the Zerk fittings. But the location of the grease on yours makes me suspect that it may not be that. Just wanted to mention it.

And get you to post up some pics of your UHWS hawse fairlead and isolator.

 

I like the wheels.

 

Is that the same as Rocky Mountain pin striping?

 

Had a 3" Pro Comp lift installed with slightly larger 265/70/17 BFG KO2 installed.

 

Lighted fog light switch ftw.

 

New light bar came in today!! Not on yet need info on brackets might get some made at work.

 

I like from which car did you get the switch from?

 

Put in a shift knob

 

Where'd ya get it? Plug n play?

 

Got my full size 35 spare and trasharoo on the rear bumper.

 

Yeah it threaded right on. It's a bit smaller than stock and not as heavy, but it feels good to me.

http://pages.ebay.com/link/?nav=item.view&alt=web&id=381196849541

 

Looks good man.

 

Thanks for the info +1

 

No problem. I might come up with some kind of sleeve to fit between the knob and the boot to keep the boot held down. The new knob doesn't cover as much as the stock one did so the boot can ride up a bit.

 

I have pelfreybilt trashroo haven't used yet.