What Have You Done To Your 2nd Gen Tacoma Today?

this sucks. drill and easy out. good luck!

 

no i tried the pliers thing and there isnt enough screw left.

i cant really get a drill into tat spot so i think im just gonna take it to a shop in the morning

 

This....




Got it as a Christmas gift. I think you can find the kit on Amazon for around $10. Well worth it in my opinion.

 

How bad were your headlights to begin with? Mine are showing some light hazing but enough to where I want to replace the lenses since they're retro fit headlights.

 

Works well.

 

Wish I would have taken the before pic but they were pretty bad. I really didn't think that they would come out so clear.

The kit basically sands the lenses down starting with 300 grit then 800 and last wet sand it with 3000. After the sanding then the lenses are buffed and sealed. Everything comes in the kit. I even have enough left over to another set.

 

Chopped off 8 in of the stock antenna yesterday

 

can't pop off any of those hoses?

 

Washed, waxed...inside and out.

12Tac

 

I used the same product when I did my bhlm. This was my comparison. BUT unless you clear coat it, it will want to yellow and haze quicker than before.

 

Weld a nut to the screw and just back it out. Works every time.

 

im not sure what those hoses connect to. id rather just be safe and not mess it up more lol

 

From what I've heard, they're meant to force the air around the tire. Helping with aerodynamics and the vortices created by the wheel. How much of that is true, is beyond me. Never cared enough to fact check it.

 

Could have saved you some money. I have mine from my 2014 TRD OR that I'm trying to get rid of.

Have you thought about a right angle drill? Looks like you should have enough room for that. Anyway it goes this will take patients. It's never an easy battle to remove a broken bolt. GL
.

.

 

• Washed, clay barred, and waxed
• Removed IVD rear shock stickers
• Ordered ARB awning and Bajarack mounts

Matt

 

Just installed my BlackSys CF100, really happy with it till now, includes GPS and rear-view camera recording. I added the PowerMagic Pro to protect my battery from discharging.

 

Adjusting my BOSS coil overs to compensate for the winch and winch mount and skids and add a little lift as well.

Problem is, I don't know how many turns equals 1" or how much height you get with each turn.

Anybody?

 

Don't quote me, but I believe most adjustable coilovers are:

1 full turn = 1/4'' of lift or something similar

Matt

 

Just did.

 

Finally got around to installing a diff drop kit. Took about an hour including getting the tools out and putting them away.