AZ BS Thread 2.0

that one i bought at Sierra Exp

 

I have 6 of those and they all work fine.
Have any pictures? I can look at it at the Monday meet tonight if you want

 

The Carling switch says 20A 12V and the Rigid switch is a 20A 14VDC.....

 

Anybody know what this is? Looks like a tick to me. It was chillin on my old steering rack

 

It's a pre-squished bug. That's all I know.

 

Bringing my old airbag from my truck to the meet this weekend, careful where you sit

 

I wanna go just for this!!

 

tundra looks good!

 

Thanks, get your alignment squared away?

 

Muahahaha

 

I'm going to take it to the shop they recommended on wednesday

 

This should be interesting! Bring on the fun and anticipation.

 

To all that work on their trucks,
Do you feel that 1/2" drive tools are necessary or can you accomplish 90% of the work with 3/8" drive tools with typical 6 pt and 12 pt sockets?

 

I have both and would say its about 50-50 although you could do a lot with a 3/8 drive if you wanted

 

your gonna need both, just how it is

 

Like Prise said, you will need both!

1/2" drive for the heavy suspension parts (spindles, leaf packs, coil overs, shocks) and 3/8" for everything else on the truck. 1/4" drive for the smaller interior parts and electronics work as well.

Craftsman makes great 250pc or 300pc sets for not a lot of coin . . .

 

I just did full suspension- coilovers and leaf packs, UCAS and 3/8 did not budge the u bolts. I would buy 17 mm,19mm and 21/22mm in 1/2 for sure.

Az

 

You don't need tools. All you need is beer and say you need help. Someone will post up their garage for you to use.