PrInSu Design Studio Roof Racks BS Thread

Orange is a tough color. I had one i liked, then I tired to have the powdercoater match it and I didn't like it. I painted those washers with rattle can and thought they looked good, then when I saw them along side the powdercoated parts I hated the color of the washers and started leaning towards my powdercoat color.

 

Did you rattle can bolts and washers? Just noticed the bolts are black. Looks great regardless. Really like that orange.

 

Did I hear correctly that you might have first gen stuff in the works?

 

Now the question is, CabRac or Bestop first.......

 

Sub'd again

 

heard a recent request for a 4Runner version....3rd gen request..

he should be at rock therapy if you needed any measurements to see if you want to expand

 

Sadly I won't be able to make Rock Therapy this year - too much work.

However, I believe young Brett will be there with his extended cab if he were to take measurements I'd drill some holes in my roof for this.

 

Yes, just get a piece of cardboard and punch a bunch of holes in it with a screwdriver. stick the bolts in so they are elevated just slightly and spray away. The washers I just set on a flat surface and tried to do light coats with little over spray so they didn't stick to the cardboard.

 

I have a version done for the extra cab that I will be installing on cohbstaco's truck here in utah as soon as I can get a free moment. The double cab version for the first gen is still in the works.

 

GAH! I seriously need to unsub from here...I have so many things I need to buy and save for right now but I want a cab rack so bad!

 

If you're open to making another extended cab rack, I'd love to rock one on my truck.

 

certainly. Let me get this one installed on jakes truck and then I will get a few more made.

 

Rad. I'd be happy to source the 80/20 parts and do the cutting/tapping/etc. myself, I've got a couple of sources for 80/20.

 

I'll put a deposit down right now for a extra cab rack. Put me on that list

 

i'm sure this has been asked many times but for the rack do you have the rubbing molding on the roof or can you keep them on?

also i cant find any close up photos of how the rack is mounted, can you provide some?

 

how many bikes could I fit on a dcsb roof rack? got 3 mountain and 1 cyclocross usually.

 

Anybody have the 2nd gen cab rac wind deflector dimensions handy?

 

47" wide by 7" tall max. The bottom edge is curved so it varies between 5-7". Thickness is 1/8"

 

47" wide rack so 4 bikes shouldn't be a problem if you do two forward facing and 2 rear facing. I imagine you could fit more if you really made it tight.