What have you done to your Tacoma today? 1st Gen Edition

???

 

They are awesome, you can barely notice they are there. You can also position your beams to be in front of you or to the side.

Yeah neither have I, surprisingly

 

Seems the drivers side "taco lean" is normal but how much would be condidered normal? noticed im about 3/4" down on that side.

 

Battery, Driver, Gas tank.. all on the same side. 3/4 drop is normal on old shocks.

 

http://www.cbioffroadfab.com/produc...a-products/1stgen-tacoma-ditch-light-brackets

 

I'm thinking about ordering a set of their rear frame plates^

 

They need to fix the site, the cart never updates to let you proceed to payment.

I will just zip tie my lights on the truck.. I read they were good for that.

http://www.tacomaworld.com/forum/lighting/358279-how-use-zip-ties-install-30-led-bar.html

 

+70lb Subwoofer

 

My truck was built with zip ties

 

Yeah , they just miss the windshield wiper as it comes up and you cant notice it to much from the inside

I made them . They wanted 45 bucks a piece for them so I said screw that and I bought some flat iron and made them myself , Turned out really well . Cost me 5.00 for the iron at home depot and my labor grinding and bending and shaping.

 

well I will probably have a pair made locally because the website is not responding.. oh well lost revenue is all their fault.

 

OTE=tibblits920;10135406]Not today but yesterday I rolled over 198000 miles just happened to notice a bunch of zeros on the odometer so I snapped a pic..And I bought my first kayak from cabelas for $200!



[/QUOTE]

looks like it's about due for it's first wash!

 

Man I've been gone awhile! Schools got me all messed up. Haven't had time to do anything. Going to be spending some maintenance funds this weekend, doing a refresh on the steering and driveline, lbj's, tie rods, carrier bearing, and clean/ possibly rebuild my calipers. Anyone recommend a place to get any/ all of this stuff for a good price?

 

Camelback Toyota or toyotapartsdeal.com

 

lol, damnit! when i got my king shocks i only got like 2 or 3 good stickers, they probably sent like 10

must be the delivery ppl messin up my stickers then.

 

I got my LBJs and OTRs from Camelback.

 

true.... Im gona order a 1/4" strut spacer tomorrow to help a little.

 

Got this little volt/temp gauge off ebay. And found the first bit of mud not covered with snow.

 

Can't you just weld a piece of scrap steel on a cb antenna tab for the hood? Just get a couple of them and weld a piece of flat steel with a hole drilled for mounting the light pod.

 

What on God's earth do you need a 70 pound subwoofer for? Blasting rust of with sound waves? Lol