What Have You Done To Your 2nd Gen Tacoma Today?

Is he still able to put the windows up? Looks like it goes around the door through the open window....

Looks great! Do want.

 

Just finished with suspension now for some new tires.

 

Looks good! What coils did you go with?

 

It probably has some sort of clip that goes in the window slit and the bottom of the door to allow it to roll up/down

EDIT: prolly something like this

http://www.etrailer.com/Mirrors/Wheel-Masters/WM6600.html?feed=npn&gclid=CLzXrPuQi8UCFQqDfgodSAUAgQ

 

Thanks! Praying they don't leak!

 

Thanks! i went with the 885, bumper is aluminum and only 50lb so i thought the 886 might be to stiff.

 

Nice looking truck, what cap are do you have on it?

 

Roger that.

 

Is that one of those rack mounted solar showers? Was it a DIY?

 

Trailer is a funfinder 139 2342 dry weight. I imagine it is up around 2700 loaded.

I put 488 gears in it so that helps with towing. Truck will pull 65 on flat ground without unlocking the tc. Any sort of incline I go to third and slow down to 55. Two times on some long steep climbs I went to second at 45 mph.
This last trip I was loaded with camping gear and wood. I think the truck did great.

With the gears and tranny cooler the tc temp never got above 190. Runs at 160 on flat ground.

Mirrors are McKesh mirrors. I love them. The top clips over the lip the window goes in and the bottom clips around the door. Strap tightens everything in place. Fully padded and no issues with scratching the paint or anything. Window goes up and down without issue.

Cap is a standard A r e X series.

 

Picked up my truck today from the dealership. Gas pedal trimmed and frame rust protection campaigns. Also installed the 2012+ rear headrests that I got from the wreckers on Monday. One step closer to perfection.

 

Chopped my bedsides. Bumper should be done soon

 

Got Stuck. (Momentarily)

 

in the grass?

 

Getting my Pioneer NEX7100 and Schoche dash kit tomorrow. Hopefully I can get it installed this weekend.

 

Probably prerunner or didn't hit 4wd

 

Not even a Prerunner. The ground got very spongy and I spun in while trying to make a three point turn.

 

Did some debadging and the mudflap trimming. Gunna do window tint soon maybe this week. Would like to see what 50% looks like on driver and passenger side windows.

 

I like that look. Was there any noticeable difference in paint fade from where the badges were?