Quick wheel question

I have an excellent oppurtunity to buy brand new 20''x9 wheels with 6 x 139.7 bolt pattern. Just unsure if they will fit im not sure and was hoping to get a quick answer on here so I can take advantage of the deal if I can. Will they fit???

Thanks!!

 

Fit what?

 

im an idiot, dont mind me. My 07 tacoma trd double cab short box

 

It's ok, we all have our moments. While we're admitting faults, it was rude of me to call you out on your lack of info considering I don't really have a good answer for you. That aside, it is possible provided the backspacing/offset is right. I know there are a couple members here running 20" wheels. With a little patience perhaps one of them, or at least someone more knowledgeable than myself, will chime in.

 

As long as you backspacing and offset are correct I don't see the problem. Ideal back space is 4.5 and 0 offset. Most of the rims 9" wide I have seen have a back space of 4.75. Look around on here for someone with 20's and pm them. Sorry I couldn't help.

 

bump

 

Sorry for not being a little more educated here but how would I go about calculating the back spacing and offset?

 

With the rim off of the vehicle, and face down you will need to lay something flat across the rim and measure from that to the center where the lugs would be, that will give you your back spacing. https://www.rsracing.com/tech-wheel.html

 

here ya go rev. stick close to 4.5 bs. the offsets will vary depending on wheel size

also what wheels are they?

 

New still in the box 20 x 9 VCT Scarface Chrome Wheels with 6 x 139.7 bolt pattern.

 

Offset is 17mm. Centre bore is about 78mm

Does this make sense to anyone and would it work??

 

Center bore is too small tacoma have a 106mm center bore. Our trucks require the larger bore.