Maxtrac Spindle Lift for 2nd Gen Prerunners

You should be fine, depends on tire size. 35's miiiiiight rub the UCAs, but I think you'll be fine

 

yeah i was trying to run 35s. What could i do to prevent tire/wheel setup from hitting the ucas?

 

Get Methods

 

Id rather not drop more $ on wheels just yet

 

Aren't the TRD beadlocks 16"?
Wheel fitment with Maxtracs is 17" & a max bs of 4.75 so 16's would have to have spacers to even fit.

 

^I don't think that's true. I'm pretty sure the TRD rims fit, but with 35's it would be close enough to rub UCA. I would recommend spacers anyways and call it a day

 

I literally had the TRD Beadlocks with spacers and was perfectly fine

 

Upon further research, Maxtrac does recommend 17", I retract my above statement about 16s.

But just to be clear, 16" TRD Beadlocks WITH Spidertrax 1.25" spacers and 35's WILL clear on these spindles

 

That's what I was trying to say, 17" is the smallest according to Maxtrac but 16's will work with spacers.
I know Alfuh has 16's with spacers but not 35's.

 

so what would yall say I should do? I dont want the wheels and tires sticking out too far due to spacers. And also I am extremely hesitant to put on spacers since it seems every professional mechanic I talk to says to avoid them. Should I just take the hit on a 17" wheel?

 

You seem to have a lot of knowledge about lifts. I'm thinking of running the maxtrac spindle with allows for 4.75 max. I want to run 17 koneg counter steer type x which has a 4.1. Just off that I wouldn't need a spacer unless I want to even out the the rear tires right? I'm from Vegas so I don't mind a little front end width like the long travel trucks.

 

Dude just get some spacers on the front and back and you'll only notice a little bit of the front end poking out more than the rear. No need to drop a bunch of cash. Ask me or a bunch of other people here, Spidertrax Spacers are pretty hefty, I have beat the crap out of several pairs, used pairs from other people and never had any issues whatsoever. Your mechanics want you to send more money.

 

Thats what I was thinking

 

As long as you have 17's & the backspace isn't deeper than 4.75" you should be fine. I have 17x9 with 4.5" & running 35x12.50, no spacer & no rubbing on the uca. I do have 1.25" spacers in the rear to even the stance out though.
Like VolcomTacoma said I have Spidertrax, I've been off road & drive mine daily, I've had no problems & have had them on for over a year.

 

Awesome! Love the wider stance in the front anyways. The second gen lifts have a lot more to account for unlike my first gen

 

https://www.tacomaworld.com/threads/maxtrac-spindle-lift-question.231131/

The op of this thread is running 16s.

All that is required is a rim with 4.5 bs or less 16 or 17.

 

Yes he is, but he is running small tires. If you were to go to a bigger tire like a 35 then the tire would rub against the UCA. At least I think. And I think the Bs has to be between 4.5 and 4.75 if I'm correct?

 

My 16s clear the spindles, I ran mine for awhile without my spacers up front and my 16s with 4.5 bs cleared without em. Now of course I have my 2" spacers back on to get that LT stance haha

 

^^ stop skipping leg day @ alfuh

 

I believe all you'd need is a 1.25" spacer to clear the 35s without the spindles. running a 4.5" bs wheel and the maxtracs you get 1.75" width increase which pushes the wheel out even more so I don't think you'd have to run spacers to fit 35s so they don't rub the uca. I could be wrong though, that's just the way I thought it was