Which timing belt kit?

I'm getting ready to do the timing belt on my 2001 V6 Tacoma. Found a couple all-inclusive parts kits and curious what everyone thought about the value.

Genuine Toyota Timing Belt Kit with OEM Aisin Water Pump for 3.4 V6 5VZFE Engines

http://www.amazon.com/Genuine-Toyota-Timing-Aisin-Engines/dp/B00I0Z14AW/ref=cm_wl_huc_item

I like that one because it appears to be all genuine parts. Is the price too high?

This one is a better price but seems like it isn't all as good of parts.

TBK Timing Belt Kit Replacement for Toyota Tacoma 1995 to 2004 V6 3.4L with oil cooler includes Aisin Water pump Mitsuboshi Timing Belt Bando Drive Belts Japanese seals GMB Bearings

http://www.amazon.com/TBK-Timing-Be...8-1085510?ie=UTF8&refRID=1C65P97WMHQMD7XT5Z0Z

Thanks!

 

http://pages.ebay.com/motors/link/?nav=item.view&id=180729034728&alt=web

This is the one I got. And everyone else seems to get.
Over 1100 sold. Cheaper too and you get the factory drive belts. There's other kits with less items too but I suggest getting it from that seller.

For sure go with an oem kit though.

 

Thanks for the info!

 

Went with the same eBay kit also. All Toyota parts

 

I plan to buy the one from Air Cabin guy??? on Ebay quite a few on Yota Tech have done so

*** ebay seller name might be wrong.

 

Yep, that's the one I listed above

 

http://www.ebay.com/itm/190521450224?_trksid=p2060353.m1438.l2649&ssPageName=STRK:MEBIDX:IT
All OEM Toyota parts, this is what I'll be getting when it's time.

 

Just did mine. Got the Toyota Kit on Ebay. And this little gem from Amazon to get the cam/crank seals our w/o having to use a screw driver. Dont forget Toyota brand coolant. When I changed my Radiator, they gave me LL Pink. My 2000 takes Red. They switched in 2003 I believe, one gallon of it and 2 gal of distilled water (wont use the whole second gallon).

$19 Lisle 58430 Shaft Type Seal Puller

http://www.amazon.com/gp/aw/d/B000F...eal+puller&dpPl=1&dpID=319x8IbVbnL&ref=plSrch
Crank pully holder too you will need. Some people make them, I bought this

$95 OTC 4754 Universal Pulley Holder Wrench with Interchangeable pins, black

http://www.amazon.com/gp/aw/d/B000Q...pully+tool&dpPl=1&dpID=41V-33YAxhL&ref=plSrch
Worked to told the Cam gears too.
And last but not least, I found it alot easier to just take the bumper and radiator out.
Have fun.

 

.