HID Xenon Group Buy Round 10!! Ends 10/15/09

If you can take a picture of your setup I might get a better understanding. Send me a pic of your stock harness that plugs into the bulbs etc.

 

like i said they are not stock. i didn't have fog lights in the first place so i bought this kit and installed it myself

 

So when do you think these might ship?

 

Man, this guy has a good question...

 

I know this is already over, but I have a question for the GB's down the road. I just read on a thread that a guy was having a problem grounding the lights and running a relay. Before you ask, yes it was from a previous GB like this one. I thought these were plug and play? If they are plug and play, then you should be able to plug them in, connect the stock plug, and it should work. Sorry for sounding a little bit demanding, just trying to figure this out.

Thanks!

 

All of the kits with the exception of the bi-xenon are 100% plug and play. The only difference with the bi-xenon is that you have an additional power wire that is wired directly to the battery and two grounds that need to be grounded. Both kits are essentially idiot proof. If placing two grounds and one power wire is to much work, installing the lights it self is going to be way to much work.

The bi-xenon install took me all of about 45 minutes and that was because I am very particular about where my wiring goes. It could be done in less than 20 minutes if you are in a haste.

 

Thanks. I just have this phobia of grounding stuff and wiring electrical stuff. No biggie though.

 

Silly question.... Just bought my new truck hours ago! Any extra kits???

If not I'm in next time

 

I'll try and take some pictures tomorrow of how I have mine setup. It will give you an idea of some options you have for grounding out the harness. I did not drill any holes either, I simply utilized existing bolts on the body.

 

Sounds good. Thanks!

 

I'd like to see these as well to get some good ideas.......thanks!

 

Unfortunately not but there will be a new GB this November for those that missed out. Keep an eye out for it!

 

Thanks x2, you would know I would see this thread today for the first time. I too will be in on the next one.

 

x2

 

anyone have any ideas for my delemma(sp?).

 

Thanks Slim!

 

Oh sorry forgot to reply to this message. The shipment for our order went out Saturday and I should receive all the kits mid this week. I then will box them all up for delivery to you guys. You should receive an email to your paypal email address with tracking information once shipped.

 

Thanks Slim... looking forward to installing!

 

Here are some pictures I took. Sorry it took longer than expected, but I have been swamped with work lately.


Only one of the grounds is pictured, although they are both grounded in the same location on each side. The relay is the black box with wires coming from the bottom of it. It is attached with industrial strength Velcro, as are the ballast.

 

Sweet......thanks man! Good locations there it looks like.