NorCal Craigslist finds

Mine, , no $$$,,, straight swap for TW folks , Located in Sacramento

New links:

http://sacramento.craigslist.org/pts/5052429479.html

http://sfbay.craigslist.org/eby/pts/5052429724.html

 

Trying to just get rid of things
Posting here before Craigslist

Leaf springs off an 07 DCSB taken off at about 80k miles. Free if you pick up (I'm in San Jose)

Original spare off the truck a little dirty but never touched ground $20

Also a pair of old man emu coil springs 2887 never installed still brand new and unused $140 OBO

Finally the chrome bumper with full tow package. Shown in picture with flags. No dents on it. $200 OBO

 

Forgot about the radio
It works perfectly fine.
$20

 

I'll take the 887s!

 

Posting this up here before CL...

05+ All-Pro Rear Plate bumper w/Hidden Hitch - $400



Has a few scratches here and there & a pretty scratch large one on the drivers side that did not penetrate the powdercoat. PM me if interested.

 

Got two memphis subs 10" street reference in a ported memphis box. Located in fresni/clovis area. It's in cl but figured I'd put here too. 300

 

That's an awesome price, but I'm holding out with my stock until hi clearance w swing out carrier. GLWS, it should go quick!!

 

That's a good deal, good luck Jason! I haven't seen you for months BTW.. but I'll find you.. lol



I'm still looking for a black rear bumper that isn't damaged or dented (trade for my chrome?) or if someone with a base 4x4 upgraded to a plate bumper. Also, the TRD aluminum skid plate that isn't damaged or dented. Seems like everybody who had one waited until it was smashed to replace it.

 

Thats a great deal. should go quick.

 

Plugging this in here..

https://www.tacomaworld.com/threads/wtt-rear-bumper.377132/

 

Peerunner, I can't see if it is black or gray, but here is one. Expensive and a small dent, but might be able to get it cheap. http://sfbay.craigslist.org/scz/pts/5063632549.html

 

PM Sent

 

Thanks for looking out man. My budget for rear bumper is exactly $0, though. Trade only for the foreseeable future.

 

Plastidip the chrome bumper, that's what I did with my old one. It's easy, cost $10 to do, unless you literally mean $0

 

I can spring for a can of paint but I'd me more adept to use Rustoleum bedliner. Which is an option. Just not sure what prep the chrome needs.

 

I rustolium bedlined my stock bumper which is sitting in my garage. I took a wire brush and sand paper to the chrome to give it some groves for the bedline to grab onto. Its held up well. The hardest part was taking the bumper off and removing all the plastic

 

Recall what grit you used?

 

Usually 400 grit for a primer coat

 

Do you prime with the bedliner spray?! I can sand a lot easier than I can straighten metal.

 

My bumper was sandblasted and PC'd. I could have sworn I read somewhere that the chrome has a light clearcoat over it. So your best best is to get a sander with some 400 grit and just spend a day sanding the bumper down, then throw some rust prevention primer down and then whatever color you want and then some clear coat,m, making to sand in between coats. To do it right, at least, so it lasts.