Pictures of URD Y-pipe installed and URD Mark 3 catback

Installed on my 2015 Tacoma DCSB, sorry couldn't get a good pic of the catback installed.

I had a flowmaster kit with a MBRP 20" resonator in front of the muffler. sounded Ok, but drone was terrible and got worse the more rpm. The URD has some drone around 40mph, but starts to fade away around 55mph +, whereas the flowmaster just got worse. They sound about the same with idle easy driving, but the URD sounds better with heavy acceleration where the flowmaster got really raspy. We'll see how the URD does with some miles, hopefully it mellow out little. I think the DCSB will have drone with just about anything but stock or the TRD catback, which sounds worse than stock.
Clip of the sound on comment #6

 

So the URD and the TRD together was too much drone?

 

I never had a TRD catback, I had a flowmaster, which had a lot of drone. The URD has some, but not as bad. I think any aftermarket will have drone in the double cab just because there is hardly any cab insulation and the muffler is right up against the floor of the back seat. I'm betting the access cabs don't have as much of a problem as the muffler would be more under the bed

 

I really like how this thing is routed. Looks like a lot more clearance underneath the truck. How far is the outlet away from the mudflap?

 

stock exit location. probably a good 6" away from splashguard

 

A quick clip of how it sounds
https://www.youtube.com/watch?v=scDsfzOpS-8&feature=youtu.be

 

Sounds good. What size tires are those?

 

sounds like barely any rasp at all, if any! how does the butt dyno rate the upgrade? lol

 

265/75/16 KO2's. with the ICON and tires, about 2 3/4" lift over stock. The exhaust mellowed out pretty quick, I'm happy with it.

 

subbed for future mods