UTAH (and Surrounding Areas) BS Thread

ud have better luck finding a unicorn then a tacoma in a local scrap yard

 

Can't even find a 1st gen in yards let alone a 2nd gen lol. On the rare chance I do find one, it's a 5 lugger, std cab, with a 2.7L. Not much help

 

Toyotas are a bitch to find man. And every time I find one in a junk yard, the parts I need are taken.

 

This website has served me well, most of the yards will pull and ship too.

 

Thanks for the response guys. I called duane's in Orem and he laughed. Im looking for an over head console with temp display door. If anyone sees one please let me know.

 

Great guys there. Check Japanese auto in Lehi\

 

http://www.malonetoyota.com/used/Toyota/2014-Toyota-Tacoma-e1fb73900a0a00652d36b4d557e53d0e.htm

Just why -_-

Armor with amp power steps......

 

So if you're stuck on a rock you can open your door and it will push you off it...of course

 

New high lift I suppose?

 

I've tried that! Didn't work.... ... got Relentless sliders...that worked .

 

$51k for a taco with 16k on it. About $150 over priced.

 

Can anyone suggest a fabricator/welder north of Salt Lake that could add a few things to my Relentless Fab bed bars?

I'm looking for 1.5" tube to extend off of them, from about mid-way up the angled side of the bar. I'm going to use the additional bar to mount bike racks to. Some sort of gusset on the bottom would be nice.

I'd also like to have a 2" vertical tube welded to one of the base plates, but have about 1/3 or so of the tube sectioned out. This will be for an antenna mount. (HAM)

I'd like to have it done fairly quickly, I'd like to get my RTT back on the truck so I can get out on the weekend.

 

Hop on RME4x4 and ask there

 

Look up Lance Cleverly on facebook. He's pretty good.

 

We need to do a meet somewhere soon

 

I sent him a message, and never received a reply. I didn't want to join another forum, so I passed on the RME4x4. I called Fat Bob's, and I'll drag the load bars over there tomorrow.

 

Long time, no see.. work work work and getting ready for festival season.. just ordered a hammock, putting the rack back on the truck to mount shovels for firefighting, looking for a way to make some shade happen, and need to buy a batter because for some strange reason, mine just went bad after getting an oil change at Larry Miller. Scuffed up my bumper a few times, I think subconsciously I'm trying to save up for a steel high clearance one, anyway.

That's all I got.. hope all is well in the land of salty tacos!

 

I'm back online, let me know if I can buy you lunch or a beer and take a look at this rack.. The bed cleats hold it, but they barely fit. I think if I grind down some of the rhino liner on the rack, or the grooves on the cleats a little, it will clip in better. It's like it needs another 1/16" or so.

 

Anyone have thoughts on where a vacuum leak would be coming from? Cleaned the MAF checked the boost gauge line. Throwing code p0170. Any help would be awesome!

 

Sure thing. I have been so busy recently it has been tough but i still have the steel skid sitting in the garage. If you can make it down my way someday when I am home I will throw it on for you and take a look at the bedrack.