1. Welcome to Tacoma World!

    You are currently viewing as a guest! To get full-access, you need to register for a FREE account.

    As a registered member, you’ll be able to:
    • Participate in all Tacoma discussion topics
    • Communicate privately with other Tacoma owners from around the world
    • Post your own photos in our Members Gallery
    • Access all special features of the site
    Quick Links: Silicone grease for UCA and Shackles Driveshaft Vibration after Add-a-leaf DIY LCA Ball Joint Replacement 2005+ Tacoma Your dakar leafs over time QSA 4" Lift Spindles Sagging Suspension

Maxtrac Spindle Lift for 2nd Gen Prerunners

Discussion in 'Suspension' started by markmatters, Feb 11, 2012.

Page 315 of 688
  1. Jun 13, 2015 at 4:45 AM
    #6281
    VolcomTacoma

    #6281
    VolcomTacoma Well-Known Member

    Joined:
    May 25, 2011
    Member:
    #57205
    Messages:
    20,617
    Gender:
    Male
    First Name:
    Jeff
    NorCal
    Vehicle:
    2015 TRD Sport 4x4 6 Speed Supercharged
    Front- Camburg 4x4 Long Travel 2.5" King Coilovers 2.5" King Triple Bypasses Wheelers Superbumps Rear- DMZ SUA 16" 3.0 King Triple Bypasses 3" 2.0 Fox bumps Wheels and Tires- 295/75/16 Toyo ATII XTREME SCS SR8 Dark Matte Bronze 16" Lighting- (2) 30" Combo light bars (4) Iggycorp diffused pods Tepui Ayer TRD Supercharger URD Mark III 3" Exhaust URD 4x4 Y Pipe URD CAI URD 2.85 Stealth Pulley Hurst Core Shifter with Hurst T URD Stage 3 clutch URD Lightweight flywheel URD Throw out bearing upgrade AEM Wideband AFR Gauge Speedhut Boost Gauge Craven Speed Flex Pod mount Weathertech Floor Liners BAMF Sliders Ultragauge sPod SE ARB CKMTA12 Hella Supertone horns Relentless Tailgate Reinforcement
    Same here, I'll tkae the west coast you take the east coast lol. $450 shipped!
     
    VolcomTacoma, Jun 13, 2015
    #6281
  2. Jun 13, 2015 at 10:32 AM
    #6282
    Taco gator

    #6282
    Taco gator Taco with 6.5" front 0" rear lift

    Joined:
    Jan 18, 2014
    Member:
    #120952
    Messages:
    662
    Gender:
    Male
    First Name:
    J.D.
    Lakeland, FL
    Vehicle:
    2014 2wd Taco
    6.5" Spindle/5100 lift front lift
    Just 265/70/r16
     
    Taco gator, Jun 13, 2015
    #6282
  3. Jun 13, 2015 at 3:33 PM
    #6283
    TheGrayRider

    #6283
    TheGrayRider MARANATHA !!!

    Joined:
    Jan 18, 2014
    Member:
    #120960
    Messages:
    968
    Gender:
    Male
    NW Florida
    Vehicle:
    2017 BBP DC 4X4 OR
    Message sent ... I'm in
     
    TheGrayRider, Jun 13, 2015
    #6283
  4. Jun 13, 2015 at 8:43 PM
    #6284
    Aceroutly

    #6284
    Aceroutly New Member

    Joined:
    Jun 13, 2015
    Member:
    #157357
    Messages:
    1
    Gender:
    Male
    How much? For the spindles
     
    Aceroutly, Jun 13, 2015
    #6284
  5. Jun 13, 2015 at 9:00 PM
    #6285
    SpruceTaco

    #6285
    SpruceTaco トヨタ

    Joined:
    May 18, 2012
    Member:
    #79082
    Messages:
    12,271
    Gender:
    Male
    First Name:
    Mike
    Clearwater, FL
    Vehicle:
    2012 Spruce Mica TRD Sport
    Tinted windows 5%, sill protectors, TRD stubby antenna, weathertech in channel rain guards, wheathertech floor mats, BHLM, Truxedo low pro qt, DTRL deleted, anytime backup camera, bed storage locks, fog lights on anytime, tailgate theft deterrent, painted engine cover, relocated horns, l.e.d bed lights, l.e.d engine bay lights, l.e.d lights above cup holders, in glove box, rear cup holder, in console storage & cubby next to steering wheel, Grillcraft grill, 17x8.5 SCS Ray10's, 35x12.50 Nitto Ridge Grapplers, Borla cat back exhaust, map & dome l.e.d's, TEQ badge on grill, Redline tuning hood struts, Maxtrac spindles, SPC Light Racing UCA's, Bilstein 5100's front set at 0 with OME 885's & extended length Bilstein 5100's in the rear, All Pro expedition leaf springs & 2" blocks, extended brake lines front & rear, 1.5" 4crawler drive shaft spacer, Beefed Taco carrier bearing drop, 1.25" spidertrax wheel spacers on rear, Kenwood DNX570 touchscreen with navigation, 30" led light bar in lower bumper opening, 1/4" top plate spacer drivers side, Bullet Proof Fabricating skid plate, Cali Raised ditch lights & Rago f Fabrication brackets, Amp Research power steps, smoked l.e.d 3rd brake light, Wet Okole seat covers, under cab LED'S tied to dome circuit


    ^^^^^:facepalm:
     
    SpruceTaco, Jun 13, 2015
    #6285
  6. Jun 13, 2015 at 9:00 PM
    #6286
    VolcomTacoma

    #6286
    VolcomTacoma Well-Known Member

    Joined:
    May 25, 2011
    Member:
    #57205
    Messages:
    20,617
    Gender:
    Male
    First Name:
    Jeff
    NorCal
    Vehicle:
    2015 TRD Sport 4x4 6 Speed Supercharged
    Front- Camburg 4x4 Long Travel 2.5" King Coilovers 2.5" King Triple Bypasses Wheelers Superbumps Rear- DMZ SUA 16" 3.0 King Triple Bypasses 3" 2.0 Fox bumps Wheels and Tires- 295/75/16 Toyo ATII XTREME SCS SR8 Dark Matte Bronze 16" Lighting- (2) 30" Combo light bars (4) Iggycorp diffused pods Tepui Ayer TRD Supercharger URD Mark III 3" Exhaust URD 4x4 Y Pipe URD CAI URD 2.85 Stealth Pulley Hurst Core Shifter with Hurst T URD Stage 3 clutch URD Lightweight flywheel URD Throw out bearing upgrade AEM Wideband AFR Gauge Speedhut Boost Gauge Craven Speed Flex Pod mount Weathertech Floor Liners BAMF Sliders Ultragauge sPod SE ARB CKMTA12 Hella Supertone horns Relentless Tailgate Reinforcement
    What he and I said ^

    Depending on location :)
     
    VolcomTacoma, Jun 13, 2015
    #6286
  7. Jun 15, 2015 at 6:39 PM
    #6287
    chadlogan112

    #6287
    chadlogan112 Well-Known Member

    Joined:
    Apr 21, 2014
    Member:
    #128187
    Messages:
    214
    Gender:
    Male
    First Name:
    Chad
    Florida
    Bilstein 5100 Front and Rear, Maxtrac Spindles, Icon AAL, 285/60/18, 18x10, 5% Tint, K&N Intake
    What's the most popular shocks to pair with the spindles in the rear? Looking to just lift 4" in the front, and just 1.5" in the rear.
     
    chadlogan112, Jun 15, 2015
    #6287
  8. Jun 15, 2015 at 6:41 PM
    #6288
    chadlogan112

    #6288
    chadlogan112 Well-Known Member

    Joined:
    Apr 21, 2014
    Member:
    #128187
    Messages:
    214
    Gender:
    Male
    First Name:
    Chad
    Florida
    Bilstein 5100 Front and Rear, Maxtrac Spindles, Icon AAL, 285/60/18, 18x10, 5% Tint, K&N Intake
    Anyone still looking to purchase some Maxtrac spindles, shoot me a PM so it alerts my phone, and I can send you group buy info! Four inches is better than no inches! :thumbsup:
     
    chadlogan112, Jun 15, 2015
    #6288
  9. Jun 16, 2015 at 12:31 AM
    #6289
    671taco

    #6289
    671taco thekeithchronicles

    Joined:
    Nov 5, 2009
    Member:
    #25461
    Messages:
    688
    Gender:
    Male
    Guam
    Vehicle:
    twenty-ten rc
    look what came in the mail this past saturday.


    DSC_0005_zpsejz0btgj_929e06d4cf294731d7035fd30e7c9c5abb22488e.jpg

    Big ups to Marie and the Headstrong crew for the customer service.
    They had these shipped to me real quick.

    These things are straight beefy..i'm impressed. Can't wait to get these things on. They are getting painted as we speak.
    Will be ditching the 885s and putting my stock coils (pictured) back on my 5100s.
     
    671taco, Jun 16, 2015
    #6289
  10. Jun 16, 2015 at 6:10 AM
    #6290
    Tacomasrock5150

    #6290
    Tacomasrock5150 I love tacos, all kinds

    Joined:
    Jun 10, 2015
    Member:
    #157143
    Messages:
    10
    Gender:
    Male
    First Name:
    Michael
    Lafayette, LA
    Vehicle:
    2014 Blue Ribbon Metallic Prerunner SR5 TSS
    Mods: Total Chaos UCA's. Toytec adjustable coilovers with 5100's. 5100"s in the rear, 1 inch Billet aluminum blocks, Pioneer NEX 4000 network DVD Receiver. Soon to be installed: JL 10 subs, Fosgate 360a2 amp for JL subs at 2 ohm mono, JL JX-360/2 for highs, Diamond Audio Kevlar 6.5's front and rear.
    The ones that look the prettiest. lol
     
    Tacomasrock5150, Jun 16, 2015
    #6290
  11. Jun 16, 2015 at 11:48 AM
    #6291
    MostEpic

    #6291
    MostEpic IG: letthemeatdust

    Joined:
    May 15, 2014
    Member:
    #129886
    Messages:
    1,489
    Gender:
    Male
    Los Angeles
    Vehicle:
    2013 PreRunner DCSB
    Party in the front Party in the rear
    n00b spindle question(s), I've been searching and asking but I'm like a child first learning about these things. I'm currently running the Icon Stage II kit with 2.5 in front with icon tubular UCA and Nitto Terra Grapplers 285x75 16. looking to upgrade to the MaxTrac spindles because they are way beefier than stock and most guys seem to run them, so I assume there's a reason. if this info is posted already, i'd appreciate a link. thanks

    the spindles add lift, but does it add travel or droop?

    is there an advantage to this 4" lift height in the front?

    with the spindles installed, can i take the preload outta my shocks?

    i heard they push out your tires 3/4" on both sides. i already experience the tires crunching the inside of the stock fenders when the front gets stuffed. do I need to alter the fenders to accommodate the tires being out further or does the lift height solve that issue?

    sorry for the dumb questions, just want to know the advantages of upgrading besides being a beefier spindle.

    thanks in advance.
     
    MostEpic, Jun 16, 2015
    #6291
  12. Jun 16, 2015 at 12:55 PM
    #6292
    VolcomTacoma

    #6292
    VolcomTacoma Well-Known Member

    Joined:
    May 25, 2011
    Member:
    #57205
    Messages:
    20,617
    Gender:
    Male
    First Name:
    Jeff
    NorCal
    Vehicle:
    2015 TRD Sport 4x4 6 Speed Supercharged
    Front- Camburg 4x4 Long Travel 2.5" King Coilovers 2.5" King Triple Bypasses Wheelers Superbumps Rear- DMZ SUA 16" 3.0 King Triple Bypasses 3" 2.0 Fox bumps Wheels and Tires- 295/75/16 Toyo ATII XTREME SCS SR8 Dark Matte Bronze 16" Lighting- (2) 30" Combo light bars (4) Iggycorp diffused pods Tepui Ayer TRD Supercharger URD Mark III 3" Exhaust URD 4x4 Y Pipe URD CAI URD 2.85 Stealth Pulley Hurst Core Shifter with Hurst T URD Stage 3 clutch URD Lightweight flywheel URD Throw out bearing upgrade AEM Wideband AFR Gauge Speedhut Boost Gauge Craven Speed Flex Pod mount Weathertech Floor Liners BAMF Sliders Ultragauge sPod SE ARB CKMTA12 Hella Supertone horns Relentless Tailgate Reinforcement
    As far as I know they droop out your lower arms a hair and raise your upper arms a hair, Don't quote me on that, i don't fully understand the geometry involved or I'd be a fabricator myself :D.

    Yes You can take the preload out of your shocks

    Yes they push your tires out an additional 3/4", but, because of the extra 4" of lift, you should not rub your fenders anymore,but with 33's I would recommend a cab mount chop and lose your mud flaps.

    Your travel should remain the same.
     
    VolcomTacoma, Jun 16, 2015
    #6292
  13. Jun 16, 2015 at 12:57 PM
    #6293
    logikoone

    #6293
    logikoone Well-Known Member

    Joined:
    Feb 22, 2012
    Member:
    #73413
    Messages:
    76
    Gender:
    Male
    First Name:
    Dallas
    long beach , ca
    Vehicle:
    trd off road
    This just came thru , waiting on the rest of the spindle kit . Thanks Marie and the folks at Headstrong !!! That was fast, I just placed the order yesterday . Below is a pic of what my truck look like as of right now , hopefully I can get it install this weekend .


    IMG_0610_zpsb0q0pnac_5d70869969ff7a816c818c3abe4f5fe2d65a09a7.jpg
    IMG_0529%201_zpsr4duhpvg_3b814d3df45359cfe5a5a6435e98030df0c74585.jpg
     
    logikoone, Jun 16, 2015
    #6293
  14. Jun 16, 2015 at 1:16 PM
    #6294
    MostEpic

    #6294
    MostEpic IG: letthemeatdust

    Joined:
    May 15, 2014
    Member:
    #129886
    Messages:
    1,489
    Gender:
    Male
    Los Angeles
    Vehicle:
    2013 PreRunner DCSB
    Party in the front Party in the rear
    Thanks for the reply. They definitely rub the cab mount, so gonna do that for sure.
     
    MostEpic, Jun 16, 2015
    #6294
  15. Jun 16, 2015 at 1:35 PM
    #6295
    SpruceTaco

    #6295
    SpruceTaco トヨタ

    Joined:
    May 18, 2012
    Member:
    #79082
    Messages:
    12,271
    Gender:
    Male
    First Name:
    Mike
    Clearwater, FL
    Vehicle:
    2012 Spruce Mica TRD Sport
    Tinted windows 5%, sill protectors, TRD stubby antenna, weathertech in channel rain guards, wheathertech floor mats, BHLM, Truxedo low pro qt, DTRL deleted, anytime backup camera, bed storage locks, fog lights on anytime, tailgate theft deterrent, painted engine cover, relocated horns, l.e.d bed lights, l.e.d engine bay lights, l.e.d lights above cup holders, in glove box, rear cup holder, in console storage & cubby next to steering wheel, Grillcraft grill, 17x8.5 SCS Ray10's, 35x12.50 Nitto Ridge Grapplers, Borla cat back exhaust, map & dome l.e.d's, TEQ badge on grill, Redline tuning hood struts, Maxtrac spindles, SPC Light Racing UCA's, Bilstein 5100's front set at 0 with OME 885's & extended length Bilstein 5100's in the rear, All Pro expedition leaf springs & 2" blocks, extended brake lines front & rear, 1.5" 4crawler drive shaft spacer, Beefed Taco carrier bearing drop, 1.25" spidertrax wheel spacers on rear, Kenwood DNX570 touchscreen with navigation, 30" led light bar in lower bumper opening, 1/4" top plate spacer drivers side, Bullet Proof Fabricating skid plate, Cali Raised ditch lights & Rago f Fabrication brackets, Amp Research power steps, smoked l.e.d 3rd brake light, Wet Okole seat covers, under cab LED'S tied to dome circuit
    With enough lift you shouldn't have to do th cab mount chop. When I had my 285's with the spindles & 5100's set @ 1.75 I had no rubbing. Now that I switched to 35's I rub a little.
    We did the 4" Maxtrac kit for a local member not too long ago & I want to say with 285's he only rubbed the mud flaps
     
    SpruceTaco, Jun 16, 2015
    #6295
  16. Jun 16, 2015 at 2:32 PM
    #6296
    MostEpic

    #6296
    MostEpic IG: letthemeatdust

    Joined:
    May 15, 2014
    Member:
    #129886
    Messages:
    1,489
    Gender:
    Male
    Los Angeles
    Vehicle:
    2013 PreRunner DCSB
    Party in the front Party in the rear
    Good to know! Thanks. I'll hold off on the chop until after I replace the spindles and see if anything needs to be done.
     
    MostEpic, Jun 16, 2015
    #6296
  17. Jun 16, 2015 at 2:37 PM
    #6297
    SpruceTaco

    #6297
    SpruceTaco トヨタ

    Joined:
    May 18, 2012
    Member:
    #79082
    Messages:
    12,271
    Gender:
    Male
    First Name:
    Mike
    Clearwater, FL
    Vehicle:
    2012 Spruce Mica TRD Sport
    Tinted windows 5%, sill protectors, TRD stubby antenna, weathertech in channel rain guards, wheathertech floor mats, BHLM, Truxedo low pro qt, DTRL deleted, anytime backup camera, bed storage locks, fog lights on anytime, tailgate theft deterrent, painted engine cover, relocated horns, l.e.d bed lights, l.e.d engine bay lights, l.e.d lights above cup holders, in glove box, rear cup holder, in console storage & cubby next to steering wheel, Grillcraft grill, 17x8.5 SCS Ray10's, 35x12.50 Nitto Ridge Grapplers, Borla cat back exhaust, map & dome l.e.d's, TEQ badge on grill, Redline tuning hood struts, Maxtrac spindles, SPC Light Racing UCA's, Bilstein 5100's front set at 0 with OME 885's & extended length Bilstein 5100's in the rear, All Pro expedition leaf springs & 2" blocks, extended brake lines front & rear, 1.5" 4crawler drive shaft spacer, Beefed Taco carrier bearing drop, 1.25" spidertrax wheel spacers on rear, Kenwood DNX570 touchscreen with navigation, 30" led light bar in lower bumper opening, 1/4" top plate spacer drivers side, Bullet Proof Fabricating skid plate, Cali Raised ditch lights & Rago f Fabrication brackets, Amp Research power steps, smoked l.e.d 3rd brake light, Wet Okole seat covers, under cab LED'S tied to dome circuit
    No problem.
    You can also adjust your coilovers a little to gain more clearance.
    My truck before 35's.
    6242360baf0d3fabf54f4e02c5329945_fb764565c3bf221fabb344c5830e12ea9c49ef7e.jpg
     
    SpruceTaco, Jun 16, 2015
    #6297
  18. Jun 16, 2015 at 2:46 PM
    #6298
    MostEpic

    #6298
    MostEpic IG: letthemeatdust

    Joined:
    May 15, 2014
    Member:
    #129886
    Messages:
    1,489
    Gender:
    Male
    Los Angeles
    Vehicle:
    2013 PreRunner DCSB
    Party in the front Party in the rear
    Nice truck. I took this vid this weekend and you'll see the tires hit a few times.

    https://www.youtube.com/watch?v=nESCJurwXCY
     
    MostEpic, Jun 16, 2015
    #6298
  19. Jun 16, 2015 at 2:51 PM
    #6299
    SpruceTaco

    #6299
    SpruceTaco トヨタ

    Joined:
    May 18, 2012
    Member:
    #79082
    Messages:
    12,271
    Gender:
    Male
    First Name:
    Mike
    Clearwater, FL
    Vehicle:
    2012 Spruce Mica TRD Sport
    Tinted windows 5%, sill protectors, TRD stubby antenna, weathertech in channel rain guards, wheathertech floor mats, BHLM, Truxedo low pro qt, DTRL deleted, anytime backup camera, bed storage locks, fog lights on anytime, tailgate theft deterrent, painted engine cover, relocated horns, l.e.d bed lights, l.e.d engine bay lights, l.e.d lights above cup holders, in glove box, rear cup holder, in console storage & cubby next to steering wheel, Grillcraft grill, 17x8.5 SCS Ray10's, 35x12.50 Nitto Ridge Grapplers, Borla cat back exhaust, map & dome l.e.d's, TEQ badge on grill, Redline tuning hood struts, Maxtrac spindles, SPC Light Racing UCA's, Bilstein 5100's front set at 0 with OME 885's & extended length Bilstein 5100's in the rear, All Pro expedition leaf springs & 2" blocks, extended brake lines front & rear, 1.5" 4crawler drive shaft spacer, Beefed Taco carrier bearing drop, 1.25" spidertrax wheel spacers on rear, Kenwood DNX570 touchscreen with navigation, 30" led light bar in lower bumper opening, 1/4" top plate spacer drivers side, Bullet Proof Fabricating skid plate, Cali Raised ditch lights & Rago f Fabrication brackets, Amp Research power steps, smoked l.e.d 3rd brake light, Wet Okole seat covers, under cab LED'S tied to dome circuit
    Thanks, yeah it hit a couple times. Are you at a full 3" or less?
     
    SpruceTaco, Jun 16, 2015
    #6299
  20. Jun 16, 2015 at 3:28 PM
    #6300
    MostEpic

    #6300
    MostEpic IG: letthemeatdust

    Joined:
    May 15, 2014
    Member:
    #129886
    Messages:
    1,489
    Gender:
    Male
    Los Angeles
    Vehicle:
    2013 PreRunner DCSB
    Party in the front Party in the rear
    I think it's just a bit less than 3
     
    MostEpic, Jun 16, 2015
    #6300
Page 315 of 688

Products Discussed in

Air Intake Snorkel Kit Fit For 2005-2015 Toyota Tacoma With 4L Right Petrol intake air snorkel kit high performance system compatible kit Replacement black Rotational Molding (2005-2015)
$73.00
Spicer 5-1330-1X U-Joint Kit
$42.33
Maxtrac Suspension (716920) 2" Rear Lift Shackle for Toyota Tacoma
$93.27
Hooke Road Tacoma Double Cab Top Roof Rack Aluminum Crsssbars for 2005-2023 Toyota Tacoma 2nd 3rd Gen Truck, Cargo Carrier Basket (Double Cab Only)
$349.99
MaxTrac K886842 Suspension Lift Kit w/Shocks 4 in. Lift Incl. Front Spindles With Brake Lines/Rear Blocks/U-Bolts/Rear MaxTrac Shocks Suspension Lift Kit w/Shocks
$909.67
Spidertrax WHS007 Blue Wheel Spacer Kit
$147.49
FUEL OFF-ROAD D564 BEAST 17X9, 6X5.5, 4.53, -12mm MATTE BLACK DOUBLE DARK TINT - D56417908345
$381.00
Old Man Emu D29XL Leaf Spring
$81.89
QSA 4" Lift Spindles (2WD ONLY) + Extended Brake Lines. Compatible with: 2005-2022 Toyota Tacoma (6 Lug/Prerunner)
$445.13
Bilstein 24-186728 5100 Series Rear Shock fits 2005 2023 Tacoma 4WD with 0-1" Lift - Monotube Design, Fade Free Performance, Optimal Performance
$103.95
To Top