(626 & 909) TW Members

Nice pulls. That your 300bhp. I should do mine one day.

 

$100 isn't bad at all for 3 pulls. I'd love to tune mine up to 300whp, but with 33s I might only get to like 260-270 to I the ground.

 

To have a shop do it, that is expensive. Not many around know how to tune my mapecu3 even though it is pretty easy to do. I'm setup to datalog on a flat smooth road and tune from there. Just need to be a bit more conservative than placing it on a dyno.

 

Still impressive for the 1st gen street driven

 

I'm still not near that power. Need more injector first. Need to experiment with 440cc to see if I can make my bottom end run smooth. I really should of did a 5th port 1000cc injector to keep the bottom running clean

It's really addictive and gets the better half of your OCD because you can never get the tune just perfect. It's just reading spread sheets on excel and making small adjustments to analyze your data again. I can even tune at work since it looks like a work program. Helps on those slower days.

 

What size injectors are you using right now? I have 550cc for my Integra turbo project. But I'm thinking about getting the 650cc just to be on the safe side. I don't want to run no more then 80% duty cycle. My fuel pump is walbro 240lph so it's plenty for my 300whp or close to it.

 

Was thinking about throwing some of these on, so I can see better at night...

At least until I can afford some LED light bars.

 

We are getting a whole grip of contracts in. Barely have time to mess around at work besides today due to business travel.

This is what I hate about my piggyback is that it doesn't calculate idc. I could use the torque app but it just a calculated value instead of actual. I'm 305cc but running 50psi making about 240bhp. When you calculate 350bhp says I need 650 which seems really high to me. I can really only tune up to 550 since it is double stock. Maybe I'm running. Mine uses stock computer to drive the injector while I skew maf. Speedfreak made 400whp on 550cc. Really need to read up more on the injectors I can use for 300whp. Probably just doing 550cc for the overhead

 

Hahahahahahahaha

Edit:that was to the nozzle lights

 

Wow that's a lot of boost 50psi What's the stock compression ratio of the 3.4L? My Integra stock compression ratio is 10:1 I only need 10psi to achieve 300whp. But then again it's a short stroke engine compared to our long stroke truck motor.

 

I'm assuming/guessing you're satisfied!

 

None of us want to have to refer to that saying"IF IT HAS TITS OR WHEELS IT WILL GIVE YOU PROBLEMS".We'd all rather defer!

 

They all sound good! I am down with Hooters, or Tilted Kilt, also Bob's, or Legends. Buuut would probs also go to Krispy or Frisco.... Hope that helps, lol. You picked all good places

 

Hey guys do any of you have a 2012 off road taco?

 

I didn't even think there were any Bob's Big Boy still open!If @Jerez has this meetup Sun.28th i'll be camping(Santa Barbara,Cachuma Lake).Bummer to miss out!

 

Mmmmm Bobs!

 

Hey guys do any of you have a 2012 off road taco?

I have my truck at toyota for a supercharger and they are telling me since i had my ecu reflashed for a tsb for pinging they cant install the supercharger software.... I need a stock 2012 off road ecu to swap someone... ugh!!

 

a 2wd ECU will work? the guy was telling me it has to be same year and have all the same features mine does..

 

Thats bullshit. They flashed/wiped it for tsb and now they won't install because of it.

 

Yeah I am pissed!! But I am trying to figure out how to make it happen. Apparently the new software makes it incompatable.