FINALLY!! Got My Sliders

I finally recieved my Revenge-Fab sliders. No I have a small amount of surface rust on them and a little more on the welds. What is the best way of dealing with this before I paint them? Does all the rust need to be removed before priming or can I use a rust converting primer? Any help would be great.

 

step one....
take to derrick smash his truck in with them..
that is all.

 

Fine! I wasn't going to post pics till they were done but hear ya go.



and here is some of the rust I am talking about.

 

Probably not all I would be smashing.

 

Right on, thanks.

 

step two....after smashing truck ram forcefully up his ass sideways to mimic what he did to you guys with these sliders.

 

No Kidding.

 

Use some fine grit sand paper on them. Then wipe them down with acetone or brake cleaner and then paint.

 

Did you get your plates and gussetts??

 

I sure did. That was the first thing I checked when I ripped open the plastic. I realy didn't want to wait another 6 months for those to get fab'd up and shipped to me.

 

Thats cool.. Because thats another journey. I was missing mine.

 

Yeah I remember reading that. I waws kinda worried there was going to be another issue.