AZ Classifieds

You're a patient man, there is no way in hell I would have let that sit, staring at me, begging me to put it in . . . Lulz ! ! !

 

@Brian007Taco look back a page

 

I want pictures!!!, a lot a lot of pictures

 

All items are located in Tucson and I accept PayPal. I can ship any of it on your dime.

7.5" IFS Front 4.10 R&P. Pulled at about 150K in order to swap for 5.29's. $40


35X12.5X15 MFG Mud Terrain OG. Date Code 4005, 6 on 5.5" pattern. $225 with the wheel, $75 without the wheel. Roughly 7/16" tread depth. Figure it's a $30 Rim, $50 Tire, $60 beadlock, $100 in hardware, so you get a nice free install on the beadlock.




2.5" X 14" X 650 LB Sway Away Springs $50


Leaf Springs with 6" AOR Shackles and Greasable hardware. One Bolt needs a new zerk. $100


3.4 5 Spd. Short Throw. Machined by me, not URD. $125


Fuel Tank (No Sending Unit, has been outside for about 6 Months) $40


1.75" to 2.5" Billet Res Clamps. $50 for the pair


6 IK22 Plugs. Never been out of the Box. I ordered them, then the 7th injector kit and they were included. $50.



Limit Straps. 1 Pair 24" Long. 1 Pair 25.5" Long. $40 Per Pair


Plug and Play Trailer Harness. 4 pin. $25


15' with 2 vests and 3 flotation cushions, in the event of a water landing, and 2 AL paddles.

 

Oh you will. I have only put on the bed rack and sliders currently. Hopefully next week suspension then bumpers end of aug with lights

 

Gonna be drop dead sexy

 

Agreed!

 

Schweet! Those ammo cans would be perfect for a center console when i replace my bench seat with bucket seats

 

Thats a pretty fucking sweet Idea!

 

2.5" X 14" X 650 LB Sway Away Springs $50


Compared to stock will these change the ride height

 

Yes they will . . .

 

Thanks dude, i thought so too! Just picked up the last 2 of them from Seabass! Hoping to find some decent bucket seats for sale on craigslist, either going to just get some cheap stock bucket seats from something, toying with the idea of putting WRX bucket seats in, because i LOVED the way my seats felt in my subie.. but monies are tight at the moment

 

I did that with my reg cab. When it had a bench i used the middle seat belt to strap it down then w/ buckets i strapped it to the seat legs

 

I have stock TRD Sport suspension and wheel/tires with 15,000 miles off a 2013 for sale.

 

Anyone interested in a stock DCSB, cat back exhaust?

 

you know how much?
like enough to tuck 285s?

 

I wanna ride!

 

I'll probably use bed liner on the inside of my cab after I remove the carpet, and bolt the can to my cab floor and make a little organizer for the inside of it or something. Maybe some switches in it idk lol

 

Oh you can definitely ride anytime...

But wait til I'm fully sas' d and caged

 

The factory springs are 13" and depending if these are rated at 650 or 700 it will ride stiffer with factory coil over assemblies. And it will depend if you're equipped with armor weighing down the front end as well. You will rub with 285/75-16 with out a doubt, will rub less if they're 285/70-17 tho . . .