What Have You Done To Your 2nd Gen Tacoma Today?

Which LED's are those, and where did you get them from please?

 

I hate wires...with a passion. Finished this today.

 

Mounted a new fire extinguisher in the bed and relocated my GPS with some aluminum sheet metal and a lot of frustration trying to bend the damn thing correctly.

 

I did the exact same thing drilled a hole in that grommet then just ran it down the drivers side.

 

After owning for just over a month finally washed it cause it's not supposed to rain per weather earlier Now it's supposedly gonna tomorrow & possible Tues. Summer of rain! Not good for boating or riding my bike.Fair weather rider, did the all year thing @ 16 yrs old. Now it's a toy & HD FXDC has WAY too much chrome to clean after riding in rain :-0

 

What state?

 

Pa. 40-50 minutes N/W of Philly

 

Nitebruisers on Amazon $30 for the pair.

 

That's cause you're a pilot ;-)
I've been maintaining turbine helicopters too long :-(
Strictly civilian, from 206's, 212,412's, BO105's,BK117,AS350,355,365's,330's 500's to currently AW139 < POS. S76's A,B,& C+ WAY better A/C than AWPC products!!Oh & GIV-SP till CEO didn't want flt dept.

 

Need to get my windows tinted. Did that to my 1st FJ, 2nd had factory tint. The Tacoma has it from factory but not dark enough & doors are barely tinted.

 

Quick question to everyone. Is it possible to do a 1" rear lift without replacing the stock shock?

Also I just installed some 5100's up front set at 1.75". Will upload pics when I get to a computer.

 

Washed and autobotized. Installed EZ down tailgate strut. Very poor design, I think I'm going to remove it. The cable is chewed up after only a few times opening the tailgate.

 

Possible but don't do it. It is so cheap for a pair of rear 5100's and it is easier and quicker to swap them out than it is to rotate your tires. Ride will be much better.

 

Not today but a few days ago I painted my rad black. much better now. Just need to paint de light bracket.

 

@Sport14 It came with a wall mount, and I just attached that to a bar of metal, drilled some holes in the bar, and then attached it above the power outlet using the stock bolts.

 

just finished up a rotor and brake pad install- need to caliper hardware was able to just get the existing pins to work but new ones are being ordered in the AM

 

haha. I learned on the 206's (but really started out on Cessna 152/172). Currently 64's, and you want to talk about wires!!!

 

Few mods today

 

But that's only 3 wires so far lol. Looks good.