tire size?

i have a 2013 acces cab
largest tire size on 16inch factory wheel with 2.75 lift front and 1inch rear?
thanks

 

I think a 265/75-r16 should work with minimal trimming of plastic. If you go up to a 33" tire you will need to look into doing a cab chop mount. Search around on the forum and you will find a lot of information covering tire size application.

 

without rubbing/cutting? 265s

 

thanks guys!

 

I have same amount of lift and run 285/75/16. Some trimming required but no cmc

 

No problem. Welcome to TacomaWorld

 

but 265s is same as oem

 

I went 3" all around and still had to trim with 285. You're only going 1" in the rear..

 

I've done some research and i believe 265 75 16's is the biggest you can go on stock rims without no lift at all.

 

265/70/16 is oem. 265/75/16 1" taller at 32"

 

I got a 2013 Access cab base and my stock tire size is 245 75 16.

 

base and SR5 come with 245/75. TRD models come with 265/70. same diameter, different width.

 

Ya, my next set will probably be a 265 75 16 since i don't have a lift and that's the max i can go for now.

 

if i go with 285/70/16 need to remove oem mud guard?

 

Yes

 

shit

 

With 285s the front mud flaps probably wouldn't help as much anyways. My tires stick out about an inch past my rear mud flaps.

 

285 75 16's wouldn't fit a 13 base without a lift huh. the biggest you can go is a 265.

 

yes but i have a 2.75 front and 1 rear

 

How would a lift affect having a 265 or 285 though cause its all based on width. the 285 is wider than the 265 so the lift is kinda useless when it comes to the width????