What Have You Done To Your 2nd Gen Tacoma Today?

See above ^^^^

 

Bought LED duallys. Planning to mount them on the roof rack.

 

Picked this snug top up last night

scuffed it bc It didn't match
Herculined it!

Much better what ya think TW?
Is there a picture heavy thread to wire up the brake light anyone?

 

Congrats!

 

Toytec Boss with three leaf deaver pack in the rear 285/17

Thanks

 

here you go man.. http://youtu.be/AMLxKcXsy9w

Super easy...
Little tip: make sure to create a picture folder then drop the photo you want to use in that folder. That's the only way your deck will recognize it.

I though this'd be kinda cool also

 

Backed into a cable and busted my pass side tail light, lol.

Ol' boy had an iron gate 20' off the road, but had snuck in a cable at 10' that I failed to notice while turning around. Oh well, replacement has been ordered along with a set of 5100's

 

Where'd you get that mirror from? I'm guessing you had to run a separate temp probe out front.

Only reason I asked is that I have just the regular auto-dim, w/Homelink, Compass with the white LED display.

 

New Methods, finally. Next up is 5100s in the rear to match the Billys up front.

 

Tested my rear led flush mounts at night finally.




Then blinding the kids lol

 

Which ones are you referring to? The Quickfist mounts I got from Amazon.

$10 END OF ROAD Original Quick Fist Clamp for mounting tools & equipment 1" - 2-1/4" diameter, 2 Count (Pack of 1) - 0010

http://www.amazon.com/Original-Quic...UTF8&qid=1437738209&sr=8-1&keywords=quickfist

The L-track I had to purchase in 100" lengths and cut to size. Then had to drill and countersink the mounting holes.

 

What flush mounts are those?

 

you are king!!

 

PrInSu roof rack on. Also fixed my lightbar issue (fell off..)

 

Got my truck back from Eastman Independent yesterday from having the main crankshaft seal and pulley replaced. I immediately did a quick wash to get rid of the remaining oil residue on the crankcase and front suspension.

I also changed out my air filter and did my first external mod to my truck by installing the BPF Skid plate and shackle bracket. Pretty pleased with how it turned out. Certainly more modifications to come!

 

Did you have them fix the timing cover leak while they were at it?

 

Did you have them fix the timing cover leak while they were at it?

 

I got it from a forum member who sells them. Yes, I had to run a separate probe for the temp. I need to find a better place for the probe though, after idling for a few minutes, the radiant heat from the engine/radiator causes the temp to rise.

 

There was no leak from the timing cover, and the inspection confirmed that, although I understand that's where the 2nd Gens typically leak. There was a nice gash in the main seal though.

 

Well that's good! Hmm, you're talking about the crankshaft seal correct?