What Have You Done To Your 2nd Gen Tacoma Today?

Wut knocked it out of balance?

 

Sport grill swap

 

Nothing. I ditched the stock steel spare with the OEM tire for a matching TRD Sport wheel and 265 Duratrac. I mounted the tire myself at home with a set of spoons back in the spring and just installed it back on the truck with out having it balanced at time. I like the idea of having a matching spare

 

Lmao..... Now I see

 

Prepared it for a winch mount

 

Check out these reverse lights!! Philips 12841B2, 921 direct fit.

Stock

LED

Stock - 1 bulb

LED - 1 bulb

Both led installed

 

Which brand did u get?

 

OEM

 

Did u get hood protection from the hood protection?
I hear dem fuggers rub the paint off after a while

 

Great product photos!

 

They most certainly do. The little rubber bumpers on them will rub through the paint after a while.

 

Installed my new Mad Max shift knob! Downloaded the file and had it locally 3D printed. Intend to paint it up at some point, worn chrome, or some metallic look.

 

Wat! Imma 3D print me one like that too. I wonder if there is a way to print one out of wax and then make a cast form out of it and then make some real metal ones....

 

You could just have one 3D printed with metal. Idk if it's possible with this particular model because I know next to none about 3D printing, but it is quite a bit more expensive.

I saw metal options on the commercial 3D printer sites, but I ended up using 3dhubs if I recall the name right, and everyone local was mostly ABS or other plastics.

 

added 40,000 lumin to it.

 

This wa my hell last night at ikea.

 

One of the benefits of being divorced ..lol.. That would take me a year to put together

 

Tightened up the spring on the Ol armrest to support the extra weight.

 

Details on how you tightened the springs?

 

I just took the plastic covers off of the bracket, pulled the 4 screws, pulled the bracket out. Pry one side of the mount up (where the rod goes through) and using a screw driver I tapped it out. I then took a pair of needle nose pliers and twisted the spring once and fed the rod back threw to hold it in place. then I pinched the bracket back down using a vise and reinstalled. It was a P.I.T.A. but It's possible.