aal's with a level lift?

i put a pro comp level lift on my reg. cab a while back and now(to me) it seems like the front is higher then the rear, should i put 1.5 aal's on it? anyone done thins before? the level lift was supposed to give the front 2.25 of lift by the way..

 

I used the 3" pro comp level kit with AAL's .. worked great... gave me about 3.5" of actual lift.

AAL changed the ride in the back - made it quite a bit more stiff - but have been very impressed with lift so far. (And it is level!)

 

what size aal's did u put on there?

 

just a hint AAL have nothing to do with 4-cylinders. when he says 3.5 inches of lift that is probably in the front so he probably has something like 2 inch lift AAL's. Just a guess.

 

wow! thanks for the hint!

 

I did answer your question

 

I have a 3 leaf pack in my 4cyl 4x4. It seems that the reat is sitting low. Does anyone know of an AAL that will provide a good ride quality and keep the rear at the stock height?

Bill

 

Adding any kind of AAL will make the ride some what stiffer and it will raise the back end of the truck. so to answer your question. 1: good ride quality, yes but it will be a little stiffer...2: keep the stock ride height, no but i thought you said the rear was sagging? in that case just mesure out the correct height you want in the rear of the truck and find an AAL that lifts it X amount, and you will be good to go.