Florida B.S. Thread

I can imagine it now! Paint it yellow and call it Timbo's Taxi Cab Service

 

Meanwhile, in Florida

 

a little bit of rain and everyone loses their minds.

 

Does someone make anything for a winch plate for a 05 with factory bumper?

 

@Timbo89

 

http://usoffroad.us/store/winch-mount-bumpers/tacoma-winch-bumper

 

Still need to cut the fairlead hole and brace the fairlead plate wit a 3/16 backer. Same way they have it. Then need to make a top part to the front so it's not such a small part and don't wanna cut my arm when reaching for the lever

 

here it is.

 

my AC is only working on the high setting. what can be the problem?

 

Check your blower resistor connector,is it melted? Then you need a sub harness to splice in and a new resistor. It's down where the passenger floorboard.

 

cool man ill check that.

 

Yeah if you google it,it should come back with a tacomaworld link with detailed pics. I always use my blower on setting 3 and it was melted.

 

Anyone here with a '12+ 4wd(non off road) And do the yellow wire mod?

 

Yes, don't waste your time. It's useless. Better off two-foot driving.

 

Ok thanks. I really want to regear so maybe a ARB in the rear at least. What setting do you use on the VSA switch? Trac mode or all off?

 

She goes all off automatically in 4-lo.

 

Good thing or bad looks like batman just saw a ghost

 

good thing lol im digging it!

 

Pic heavy post

Wish i could get this thing painted and on. Have to do 4 more cut outs.

Right at the outter part of the winch plate im gong to do a high lift cut out. Waiting on the ruff stuff d ring mounts to come in the snail mail.




little upset that this isnt even but once i get the lower plastic tabs set i can adjust it some.





may put a brace here