Power steering return line fitting

I am looking for this fitting. It is attached to the power steering cylinder. The return hose attaches to this. This is for a 1995 Tacoma 4WD 4cyl manual transmission A/C.

 

Sorry about the double pic post. It disappeared so I uploaded it again.

 

Go to www.toyotapartsdeal.com, put in your VIN and look under "Power Train/Chassis...Power Steering Tube" section. I believe it's the part number 44416-????? [Tube, Return (for steering gear outlet)] . The last 5 digits will be specific to your vehicle. Once you obtain the full part number you can try googling for an image with that part number to see if it looks the same.

 

I looked it up and there either isn't a picture, it pictures the wrong part, or they show a mummy like wrapped drawing.

 

What part number did you come up with?

 

44416-42020. However this number brings up images that don't show the fitting with a 90 degree. That may be what we have to use but we have no info on diameter, thread size etc.

 

Do you have a "drop bracket" lift? That looks like the fitting used with some of them. The stock fitting has just a slight bend, maybe 10-15 deg.

 

Also in need of the parts and have a high pressure hose with 90 degree tight bent
16x1.5 thread male to high pressure hose to straight fitting lime in picture.