Official Tennessee Thread

Are you sure it's not blown?

 

You're not funny

 

Hahaha no problem

 

Stock both, neither are working, and pretty positive it isn't blown. Me and a local installer put power to it and it would move and act as it normally should.

 

Only way to be sure is to ohm it out with a multimeter. I don't know if they'd be 4 ohm or 2 ohm speakers though. I guess you could check the known working side as a baseline. Have you checked the wire coming into the door, a lot of times they break in the harness coming into the door. Jump the speaker wires from the kick panel to the speaker and see if it starts playing. Or you can keep ohming it out down the line until you come up with an open or dead short.

 

Adam had the same radio that I do and just sent me pictures of the wiring diagram from it and I'm gonna check and make sure everything is perfect. My luck I somehow fucked one of those up when I pulled the radio out.

 

Thanks that is what I was talking about. I just couldnt word it right ha.

 

That's why I draw pictures. Easier than trying to word it correctly. Although usually it's on napkins with crayons.

 

Well cables off officially and my uverse stuff is ready to go to ups to be sent back.

 

Hahaha it's amazing how smart kids are and how dumb we become when we grow up. Put 10 adults in a room with all the technology in the world and they will debate for a week on the most efficient way to cross the street in a neighborhood. Put a kid on the sidewalk for a week and he will have drawn a Picasso with 5 boxes of sidewalk chalk, built a giant sand castle out of dog poop, rocks, twigs, old newspaper and leafs, met every person in the neighborhood twice, discovered that the sun turns on during the day and turns off at night, figured out bugs taste bad and already chewed gum still tastes good and ....... crossed the street 2,000 times by simple skipping back and forth. Man, why didn't we think of that!!??

 

When we getting another beer in Knoxville fellas?

 

https://www.tacomaworld.com/threads/end-of-summer-2nd-gen-skid-plate-group-buy-rci-offroad.386505/
Just saw this.........

 

Saturday or Sunday night. I'll be up there

 

I actually don't like any of those skids besides the diff skid. The diff skid is small and compact and looks to protect everything well while keeping a low profile. The other skids though ...... Ifs skid looks too small and should cover more area out closer to the cam tabs. It looks to use smaller bolts then the stock ones at the front cross member. It also uses only 4 bolts instead of 6 which should create a weak spot in the middle of the skid. I don't like the holes in the front either as those as weak points and could very easily be crushed in. The other skids are just flat with all the bolts exposed. Not only are they hurting your clearance in every single spot but it also provides an easy way to shear/ grind off bolt heads. As for clearance, yes I know you want the skids for protection but taking the lowest point of your truck (the tcase cross member) and extending that point out to make the entire truck that low is not what you want. You put on bigger tires and a lift to gain clearance and then you take it away with these. Haha I have an ifs skid and it's a damn good thing too cause it has proven it's worth numerous times. The only other thing I ever hit is my tcase cross member and my rear diff. I've never touched the front driveshaft, transmission, tcase or gas tank. Not that it couldn't happen but I feel pretty confident that it would've happened by now. Haha

I'm not saying skids are a bad thing, I just don't like the design of these

 

Skinnies!

 

Too skinny

 

You don't say that! They look just fine.

 

Your tires look like a crack addict that is also anorexic lol but you don't have to worry about trimming that shit!

 

Yea, I don't know anything about them. Just remembered he said he was in the market and I saw this sale. Soooo, I heard back from Essentially Offroad about the sliders.....$600 for weld on no k-out. LMAO! I was like "Uh, Goodbye". I guess that supports your theory of big shops not wanting small business.

 

I think 285's look skinny