What Have You Done To Your 2nd Gen Tacoma Today?

You might want to consider using a Sandisk Cruiser Fit USB drive or similar. If you hit that USB thumb drive with your hand or knee, you may break that USB port.

 

True, I fucked up my laptop USB port

 

Staahhhhpppp messing with me, it's been a long day!

 

Thanks for the suggestion!

 

What i did is routed the usb extension wire from the back of my radio under the console and it sits right below the cup holders. I want to dremel out a usb sized hole eventually so i can take out the cup holder and change my usb if need be.

 

Next on my mod list is painting the pinch weld. Any suggestions on best option? Derp or real paint?

 

could use a F/M adapter like so:
http://www.ebay.com/itm/10x-OTG-F-M...ea200a&pid=100012&rk=3&rkt=10&sd=371283961544

I've got two coming in the mail that i no longer need... I could mail you one.

 

Generous but its alright i plan on getting a better deck anyway my jvc is... rough.. i plan to either get a pioneer prs80 or a double din ... but the double din is so expensive.

 

Real paint. I did mine and it was easy. Just clean it, tape it off, and I hit it with some semi gloss enamel frame paint. Wait 15 minutes then peel the tape.

 

Installed from pelfreybilt skid plate was going to install mid when I discovered this was going to get it in the way:

I need to bend it back somehow so it sits flush for the skid. Any suggestions?

 

Nice setup. The top really came out well.

 

hammer should do...

 

Put brackets onto my modded con-ferr rack and put it on my oem roof rack . Not sure if I really like it yet. Might end up moving it to the bed not sure. It's huge 5'x4'

 

That's what I was thinking.

 

Put my winch bumper on today since i got tired of running with just a crash bar in the front. Was fun building it. main section is 1/4 side and lower skid is 3/16 center front bar is 7/16. Designed it off the u.s. offroad design winch is a 9.5 smittybilt





good side picture of truck. She is dirty but sexy

 

I like that rack but personally feel like it looks out of place on the roof. Might be because it is sitting high off the roof just my personal opinion.

 

Thanks, I'm pretty stoked about it!

 

It sits at the same height as any other rack that would be mounted onto the OEM racks. I think it just might be too big for the roof. Also wondering if it would look better painted all black rather than white. I just need to save up and get a pair of those voodoo bed bars then mount it in the bed.

 

Must just be the picture but yeah I like when they are in the bed that's what I want to do. I think it would look good in the bed if you left it white. I like your black OR wheels been thinking of dippin mine