Online Mind Games! Post 'em up!!

How do you get the damn cube key? I have tried everything and cant get it.

 

i hate this stuck on cube key need help

 

i cant get the wrench to get out whatever is in the holes in the floor or where to find the black light

 

The stupid checker board is killing me..... I have the folowing codes.

Go=a1 od=b1 lu=c4 ck=c3
1. b3 2.d2 3.b2 4.a2

help!

 

OUT!!!!! off to the bar, i need a drink.

 

Hey JT do you see how you have GO=a1? That really means that the G is an a and the O is a 1. Now take that example and shine the black light on the good luck paper. You should see lines going in between the letters. Example, you have a line from the G box to the D box. That means your code is actaully a1 because the G=a and the D=1. Capice?

 

Still stuck on the damn cube!

 

Ill try it out. Thanks!

 

I am out!!!!

 

You don't have to get behind the case to get the third wall key. Look at the case from the room perspective with the UV light. You'll see a glowing dotted square with a dot in the lower right corner. Move to the wall and shine the UV light again. While holding the light, try to click the button. The wall should open up.

 

Replace the letters on GOOD LUCK with your codes, then you match them up to the map revealed by the UV light on the Good Luck paper (in your case like below):

Code:

|---|
a1 b1  
  X
c4 c3
|___|

The lines tell which letters and numbers go together. The 1 and the c go together, a and 1 go together, c & 1 go together and b & 4 go together (when you get all the codes). So the 4 missing sets would be a1, c3, c1, and b4. Plot those with the 4 codes on the piece of paper according to the grid labels on the checkerboard. Note that on the checkerboard numbers are highest (4) at the top and lowest on the bottom (1). Letters are left to right.

 

http://www.addictinggames.com/theimpossiblequiz.html
good luck lol

 

i dont know how the safe works. do you gotta hit the numbers right on every time? or can you come close and click to get them. i cant drag the wheel over to the desired number either :S

 

yeah i have the magnet on the wrench. when i try to get whatever it is out nothing happens