3" lift with stock rims.

Anyone have pics of biggest tires that'll fit on the stock rim under a 3" lift? Threads are not giving me much.

 

265/75/16 (assuming you have 16" rims)

Check my signature for the photo.

 

Depends if you use wheel spacers or not. NO spacers would be 255/85/16.
With a spacer you can run up to a 285/75/16 on a stock wheel I believe.

 

Thank you guys. I'll check it out.

 

This is mine with a 3" lift and a 1.25" wheel spacer on 285/75/16.

 

Very nice! What lift did you use?

 

Have a look here. Not much but you do t need 65 pages of responses to figure it out.

https://www.tacomaworld.com/threads/biggest-tires-on-stock-16-rim.205119/

 

And here

 

subd

 

May be a dumb question but I'll need to order two sets right? One for each tire, or do I only need one set up front. I've never ran wheel spacers before and just lifted my 2009 TRD Prerunner and want to put on 285 75 r16

 

They come in pairs. I got mine from toytec.

 

Yes, four spacers in total, one for each wheel. They are sold in sets of 2 so you will need two sets UNLESS you simply want to run spacers on the front to clear the bigger tires. People on this forum do it but I don't know it it's recommended. Before we start a new thread on this topic here, google this: wheel spacers on 2nd Gen tacoma+tacomaworld and or wheels spacers on front only+tacomaworld

Bora also makes hub centric spacers and they make then in .25 or .5" increments so if you don't want 1.25" spacer they make 1.5" and 1" and so on. I'm not sure how if you can get away with 1.5" spacer without cutting your lug nuts though. I know someone here knows that answer....Anyone?

 

Yea that's what I don't wanna do is have to modify anything, just simply add the spacer and and roll with it