AZ BS Thread 2.0

That's understandable, lotsa history in it.

 

Ok very odd. Did you unplug anything during the cutting?

 

Nope. Not that I know of anyway. Something could have come unplugged without my knowledge and I didnt plug it back in cause I didnt know

 

Am I missing something?

 

Ok so I got the reverse and seat belt to stop coming on with the right turn signal. But now the blinker is flashing fast like the bulb is burned out. All the bulbs are fine upon inspection. But the entire tail light on passanger side is out. No turn signals. No brake light or reverse light or running lights when the lights are turned on. All fuses are ok aswell

 

Did you check the flux capacitor?

 

Or the blinker fluid level?

 

Yes and Its still running on all 10 valves. Just to check I went back to 1999. Everything went fine

 

Yep. Just topped It off

 

Go inside, sit on the couch and drink 6 beers. Come back out later and try again

 

Weird, when mine went out it did the same thing to electrical system. Best of luck. *Drives Away in a Delorean*

 

Im at work. And I leave for phx and sd right after work

 

Its got to be something In the electrical. The bulbs are fine I disconnected the power I had going in that I spliced into the reverse light. But still nothing

 

How did you fix the one issue? They should be related in some way.

Also have you checked your trailer plug? Maybe it got jacked up when the trailer flipped over and its grounding out.

 

How do I change a thread cover picture?

 

Depends on the thread. 1st post on builds and whatever is the most recent on others it seems

 

Yeah just made abuild thread and the x runner is the cover photo for an expo build page lol!

 

Change the first pic in the first post and make sure the last pic in your thread doesn't have an image. It should pic it up from there.

 

Linky

 

Nice! How was the install?