Long Travel BS Thread

I dont , contact the seller.

 

derp

 

Posting this ish everywhere.... Sorry not sorry

Ok so the decision has been made to build up the black donor truck not the red on e for many reasons. So the red truck is being stripped and parted. The suspension is going as is the front diff and complete rear axle. Everything else is up for grabs. 3.4 is running great with fresh timing belts, water pump, tensioner etc, (has a gasket leak between cylinder 2-4, mechanic confirmed) frame has a ton of fab work and straight within Toyota specs. Frame woul be great for a longtravel truck. Trans and transfer very well maintained. 4x ecu, harness and all wiring etc available. Pretty much anything a 3.4 trd 4x4 dbl cab would have, minus suspension and diffs... Let me know. I know a bunch of u wanted parts but I don remember who cuz had some many text, pm and dm's asking lol

Trying not to ship, prefer pick up or meet.

 

LOL please explain how this is sketchy? as long as its not a stock spindle

 

playing around with sketch up, 2" tubing, 1.5" for the shock cross braces, ill do ruff stuff 1.5" tubing tabs that slip over the tubing and some dimple die plating for cool guy points lol 4 couplers so i can unbolt it yada yada.. pretty straight forward, any ideas, comments?

 

My crossover tube doesn't work anymore...any ideas for a new one? Should I go right over the sc nose??

Old crossover went right where the pulley is, I thought about cutting it at both ends of the nose and bending a tube over the nose

 

I'd go right over the snout.

 

I think the crossover tube I had was only 1.25...pretty small but did the job

 

Looks good, but I would put a downward diagonal tube from the farthest corners against your cab, go down and in towards the frame rail. That will help keep those shock mounts from flexing upwards

 

Eventually they'll get on a truck.

 

Could do a boxed plate brace over anywhere you wanted.



That way you can make it fit over or around anything you want.

 

Can't wait to pick her up this afternoon! Looking forward to a few dirt miles this weekend!

 

I keep considering selling the Camburg kit to switch to the LSK kit. If it had been released before I purchased mine I would of definitely gone with theirs.

 

Your truck has come a long way. Congrats Brett.

 

I want to see some close ups of that suspension. Those 4x4 spindles are beef!!

 

I got some pics.. I finished it up today, hope you enjoy it Brent!
Heres some pics, and some other stuff I have done, bedcage, dodge ram, shock hoops for my truck running a matching SAW bypass now.



My shock hoops...

Dodge

Bedcage I made..

 

Anybody here going to try to go to the swapmeet?

 

whens the swapmeet?

 

This weekend, technically sunday but from what I hear its best to get there saturday afternoon

 

Yeah we're headed down in a small bus tomorrow morning.