1. Welcome to Tacoma World!

    You are currently viewing as a guest! To get full-access, you need to register for a FREE account.

    As a registered member, you’ll be able to:
    • Participate in all Tacoma discussion topics
    • Communicate privately with other Tacoma owners from around the world
    • Post your own photos in our Members Gallery
    • Access all special features of the site
    Quick Links: Sumitomo Spark Plug Wires vs NGK Fuel Pressure Sensor Switch Possible to run a 4 prong harness with a shell’s 3rd brake light? Only the headlights will turn on the trailer lights Fixing crap on my 2004 Tacoma with 188k miles, opinions wanted . . . 98 Tacoma 2.7L - Vacuum and Coolant hose replacement kit?

1st gen led light bar ideas

Discussion in '1st Gen. Tacomas (1995-2004)' started by 2002, Sep 30, 2014.

Page 7 of 28
  1. Sep 9, 2015 at 9:39 PM
    #121
    ryancorbett3

    #121
    ryancorbett3 Member

    Joined:
    Jun 8, 2015
    Member:
    #156993
    Messages:
    7
    Gender:
    Male
    First Name:
    Ryan
    Montana
    Vehicle:
    2015 Tacoma TRD Sport DCLB
    Any thoughts on adding a light bar in this location with a license plate? Montana requires a front-facing plate... -_-
     
    ryancorbett3, Sep 9, 2015
    #121
  2. Sep 9, 2015 at 9:57 PM
    #122
    NightProwler

    #122
    NightProwler Well-Known Member

    Joined:
    Nov 12, 2013
    Member:
    #116470
    Messages:
    3,486
    Gender:
    Male
    First Name:
    Harlan
    Maricopa, Az
    Vehicle:
    '01 Prerunner, '16 trd4x4, '03 cbr954rr, '03 rc51
    That sucks. Idk man. Only way would be to relocate the plate. Maybe off to the side? Make a bracket of some sort with a couple little tabs and have those tabs stick out between the valence and bumper, fold them down, and mount the plate there. Idk.

    Edit: sorry for the crude photo but, something like this:
    IMAG1632_zpsxwhv6n4c_edit_1441861110291__d8f5e53a031bdcde7a32f30036746794fb35f4ed.jpg
     
    NightProwler, Sep 9, 2015
    #122
  3. Sep 11, 2015 at 10:06 AM
    #123
    dirtychemist

    #123
    dirtychemist Active Member

    Joined:
    Nov 6, 2013
    Member:
    #116034
    Messages:
    32
    Gender:
    Male
    California does too and I'm pretty sure Nevada has that law. I never ran one in either state and I was never pulled over. If you get hassled for it ask how many Corvettes they write tickets to since NO ONE pops out the license plate shaped piece on the front about the size of a license plate.

    If you couldn't do like the above photo what about putting it on the dash?
     
    dirtychemist, Sep 11, 2015
    #123
  4. Sep 11, 2015 at 3:10 PM
    #124
    Sicyota04

    #124
    Sicyota04 Slowly but surely.

    Joined:
    Jan 9, 2015
    Member:
    #145940
    Messages:
    3,560
    Gender:
    Male
    First Name:
    Morgan
    California
    Vehicle:
    04 DC 4x4
    I bought a Trailgear bumper and haven't been bothered at all out here in California for not putting my liscence plate back on.

    image.jpg
     
    Sicyota04, Sep 11, 2015
    #124
    YotaGurlIAm likes this.
  5. Oct 8, 2015 at 9:57 AM
    #125
    smkarvonen

    #125
    smkarvonen Member

    Joined:
    Sep 25, 2013
    Member:
    #113230
    Messages:
    5
    Gender:
    Male
    First Name:
    Scott
    NC
    Vehicle:
    01 Tacoma
    OK...first timer here...
    still a work in process but i have 2 23" bars facing forward, 2 (soon to be 4) 4" on the sides and (not installed yet), a 18" on the rear of my basket.
    i will also be installing an overhead console from a tahoe - using the front panel for rocker switches.

    and of course, lots of things on my list but as many of you know, takes $$$$$$$ v3.0.jpg
     
    smkarvonen, Oct 8, 2015
    #125
    Jibber likes this.
  6. Oct 9, 2015 at 11:41 AM
    #126
    toyotatacoma977

    #126
    toyotatacoma977 New Member

    Joined:
    Oct 9, 2015
    Member:
    #166225
    Messages:
    4
    Gender:
    Male
    First Name:
    tyler
    Vehicle:
    green hornet
    rims, 3inch lift in front 2in in the back, 30inch lighter in valance, window tint, aftermarket grill, low profile toolbox.
    image.jpg 30inch behind the balance and working on cubes in the blinkers
     
    toyotatacoma977, Oct 9, 2015
    #126
    Jtcaudle15, lil red tacoma and nelson18matt like this.
  7. Oct 9, 2015 at 11:43 AM
    #127
    YotaOverAll

    #127
    YotaOverAll Backyard Performance

    Joined:
    Jul 9, 2012
    Member:
    #82254
    Messages:
    14,700
    Gender:
    Male
    First Name:
    Jessie
    Panama City, FL
    Vehicle:
    02 Prerunner SR5
    3" Toytec spacers, Bilstein 5100s in the back with add a leaf and overloads removed.
    That's exactly what I wanna do
     
    YotaOverAll, Oct 9, 2015
    #127
  8. Oct 9, 2015 at 11:46 AM
    #128
    smkarvonen

    #128
    smkarvonen Member

    Joined:
    Sep 25, 2013
    Member:
    #113230
    Messages:
    5
    Gender:
    Male
    First Name:
    Scott
    NC
    Vehicle:
    01 Tacoma
    never thought about replacing the blinker - i moved the blinker bulbs to the marker lights and just have the lowers on with amber bulbs...the LEDs with an amber cover would make killer fog lights
     
    smkarvonen, Oct 9, 2015
    #128
  9. Oct 9, 2015 at 5:02 PM
    #129
    toyotatacoma977

    #129
    toyotatacoma977 New Member

    Joined:
    Oct 9, 2015
    Member:
    #166225
    Messages:
    4
    Gender:
    Male
    First Name:
    tyler
    Vehicle:
    green hornet
    rims, 3inch lift in front 2in in the back, 30inch lighter in valance, window tint, aftermarket grill, low profile toolbox.
    I hope to take the 2 outside cubes apart and put Amber backlighting in them and plug the wires into my blinkers so i have blinkers
     
    toyotatacoma977, Oct 9, 2015
    #129
  10. Oct 9, 2015 at 6:01 PM
    #130
    smkarvonen

    #130
    smkarvonen Member

    Joined:
    Sep 25, 2013
    Member:
    #113230
    Messages:
    5
    Gender:
    Male
    First Name:
    Scott
    NC
    Vehicle:
    01 Tacoma
    that sure would let everyone know "I AM TURNING! GET OUT OF MY WAY!"
    ...    and thats how it should be...
     
    smkarvonen, Oct 9, 2015
    #130
  11. Oct 9, 2015 at 6:52 PM
    #131
    devinzz1

    #131
    devinzz1 Well-Known Member

    Joined:
    Jun 28, 2014
    Member:
    #132892
    Messages:
    6,991
    Gender:
    Male
    First Name:
    devin
    lewisporte Newfoundland
    Vehicle:
    2023 aclb trd or mt
    icon stage 10 kit, toytec 1" bl, 35" general x3s, 17x9.5 procomp wheels, locker anytime mod, s&b intake, blackhawk 2.1 tune,
    Anybody with pods on the 95-97 front end? Thinking about putting them here.

    DSC_0133_zpsiam1mezn_da35e69a3a2436ca748e33ddb782814d6e7b27b9.jpg
     
    devinzz1, Oct 9, 2015
    #131
    Jon G likes this.
  12. Oct 15, 2015 at 4:43 PM
    #132
    toyotatacoma977

    #132
    toyotatacoma977 New Member

    Joined:
    Oct 9, 2015
    Member:
    #166225
    Messages:
    4
    Gender:
    Male
    First Name:
    tyler
    Vehicle:
    green hornet
    rims, 3inch lift in front 2in in the back, 30inch lighter in valance, window tint, aftermarket grill, low profile toolbox.
    image.jpg
    image.jpg
     
    toyotatacoma977, Oct 15, 2015
    #132
    Jtcaudle15, lil red tacoma and Lfaub03 like this.
  13. Oct 27, 2015 at 9:22 AM
    #133
    Dominic_worm

    #133
    Dominic_worm Member

    Joined:
    Oct 19, 2015
    Member:
    #167073
    Messages:
    11
    Gender:
    Male
    First Name:
    Dominic
    Vehicle:
    95.5 Tacoma 3.4 ext cab black
    2.5in rough country lift Flat bed 33 in tires led bars
    How did u mount the led bars in the signal posts?what size are they?
     
    Dominic_worm, Oct 27, 2015
    #133
  14. Oct 27, 2015 at 1:43 PM
    #134
    NightProwler

    #134
    NightProwler Well-Known Member

    Joined:
    Nov 12, 2013
    Member:
    #116470
    Messages:
    3,486
    Gender:
    Male
    First Name:
    Harlan
    Maricopa, Az
    Vehicle:
    '01 Prerunner, '16 trd4x4, '03 cbr954rr, '03 rc51
    They were pretty hard to do. I've been meaning to do a write-up on them but haven't had time. I actually got in a front end wreck and had the lower plastic valence replaced, and just haven't reinstalled them in again since. When I do I'll be doing a write-up for sure. I basically cut out the turn signal box inside, left two tabs in the plastic top and bottom, and used multiple pieces of flat stock pieces to mount them in. As well as mesh inserts in front of them to fill it in. One day I'll get around to it. Not sure when. I kinda lost access to tools so I need to get some before I do this again. For now here's the only pic I have of the backside for reference. Took a lot of creativity. I have more pics of cutting out the box if you want them. But other than that, a full tutorial is really needed to do this properly.. they're a total bitch. especially the mesh inserts I used to fill it in. I had to get longer tiny Allen bolts for the front caps on the led bar, along with tiny washers for spacers, and assemble the bars to the mesh after the mesh was installed first.

    And they are 8" Cree clones of the vision x evo prime.

    DSCF1945_zps2fb023e6_a96d2edfd389b396d780fbb0aaa8a16f0ca29e67.jpg
     
    NightProwler, Oct 27, 2015
    #134
  15. Oct 27, 2015 at 6:27 PM
    #135
    Laxtoy

    #135
    Laxtoy Dog is my backseat driver

    Joined:
    Feb 14, 2015
    Member:
    #148610
    Messages:
    1,352
    Gender:
    Male
    Maltby, WA
    Vehicle:
    99 3.4l 5 speed 4WD 2023 Limited DCLB 4WD
    Fox 2.5 DSC resi CO's w/ 700lb King Coils, Camburg uca's, T-100 rear leafs, 13WL Tundra brakes, 1" 4crawler body lift, 295/75/16 Hankook MT, Ruff Stuff u bolt flip, 10" Fox LSC resi shocks turned back on custom mounts, home built rear high clearance bumper with dual swing outs, Diode Dynamics SSC2 Pro rear floods, Skid Row front and transfer case skid, home built transmission skid, Mercerfab sliders, home built front bumper, Badlands Apex 12k winch with synth line, 4.56's, ARB rear locker, home built rack with CVT Mt. Shasta, eBay snorkel, Sierra LEDs 20" dual amber/white light bar, Diode Dynamics SS3 Max amber fogs, Mini D2S projector retrofit, Blue Sea ML-ACR, dual Odyssey PC1200's, 100 watt solar panel, 20 plate heat exchanger/home built shower kit
    Haven't made my pick yet, still go back and forth a lot, but thinking about this one

    http://www.theretrofitsource.com/le...ighting/xtorch-27-light-bar.html#.VjAjToQ-Ci4

    From a forum sponsor who I'd rather give my money to anyway, 10 year warranty, and looks distinct from the the 100's on eBay.

    I mainly look for the warranty at this point, I paid $300 for Light Forces I managed to destroy when I hit somebody since they say proud of the bumper face because of their large profile. The bar will sit back on my bumper so no worries about bashing it on anything, and at $150 the price is competitive with Opt7 and Totron 20" bars
     
    This site contains affiliate links for which the site may be compensated.
    Laxtoy, Oct 27, 2015
    #135
  16. Oct 29, 2015 at 4:12 PM
    #136
    vincenzo

    #136
    vincenzo New Member

    Joined:
    Oct 28, 2015
    Member:
    #167948
    Messages:
    3
    Gender:
    Male
    Vehicle:
    2004 Black Tacoma
     
    vincenzo, Oct 29, 2015
    #136
  17. Oct 29, 2015 at 4:17 PM
    #137
    vincenzo

    #137
    vincenzo New Member

    Joined:
    Oct 28, 2015
    Member:
    #167948
    Messages:
    3
    Gender:
    Male
    Vehicle:
    2004 Black Tacoma
    What type of flat stock is that? I want to copy your plan. It is awesome. Thanks.
     
    vincenzo, Oct 29, 2015
    #137
  18. Oct 29, 2015 at 4:52 PM
    #138
    NightProwler

    #138
    NightProwler Well-Known Member

    Joined:
    Nov 12, 2013
    Member:
    #116470
    Messages:
    3,486
    Gender:
    Male
    First Name:
    Harlan
    Maricopa, Az
    Vehicle:
    '01 Prerunner, '16 trd4x4, '03 cbr954rr, '03 rc51
    Ha, shit I don't remember. It was whatever ace hardware had. Something galvanized I think.

    Just remember that the opening there only supports a single row bar like mine. Mine barely fit as is. If your want it to sit flush behind the opening, you might consider extending that bracket all the way back. Another Member copied it and said that when he extended his all the way back there was a spot to bolt the bracket to some other support that sits in front of the radiator, for extra support.
     
    NightProwler, Oct 29, 2015
    #138
  19. Oct 29, 2015 at 5:25 PM
    #139
    vincenzo

    #139
    vincenzo New Member

    Joined:
    Oct 28, 2015
    Member:
    #167948
    Messages:
    3
    Gender:
    Male
    Vehicle:
    2004 Black Tacoma
    Great. Thanks. I ordered a 20" single row bar. It'll be tight but SIIICK!
     
    vincenzo, Oct 29, 2015
    #139
  20. Dec 7, 2015 at 5:32 AM
    #140
    Suggs12

    #140
    Suggs12 Well-Known Member

    Joined:
    Jun 24, 2014
    Member:
    #132572
    Messages:
    253
    Gender:
    Male
    First Name:
    Logan
    Johnson City, Tennessee
    Vehicle:
    2004 PreRunner
    3" Lift kit, Bilstein 5100 front and rear, 2881 EMU coils, 2" Deavers AAL, 18x9 KMC rockstar 1 wheels and 33" Nitto Terra Grapplers, Debadged, Grillcraft insert, clear corner and turn lights, 6k Leds, 30" Led light bar, 4 Pod fog lights.
    How did you mount the 30"?
     
    Suggs12, Dec 7, 2015
    #140
Page 7 of 28
To Top