AC condensor bolt

anyone have this bolt for the ac line that connects to the condenser?

the one at the bottom of the consensor broke as i was threading it in..need a replacement

 

to da top!

 

Anyone?

 

pic not working

 

meh.. hold on

 

fixed it

 

This is of my 3rd gen 4runner, but a lot of the 1st gen taco parts are interchangeable.

 

well cant say i can help but i can share my experience
i had to replace a bolt that hold down the sparkplugs in the engine and i just took the broken bolt to a harwear store (stines if you have one) and measured the threads next to other bolts and used one that i found

all i did was hold the two bolts together to make sure the threads match a found one that was 10mm (since pretty much everything is 10mm on the truck) and used that.

it might not be the best solution but hey it was a same day 20 cent solution

 

I will have to try that. NAPA has a bolts center here.. I figure id ask here just to have a backup plan

 

sorry i cant really help but im sure you can try to Google a parts diagram for the vehicle and have better luck finding the exact part number...
i did that first and found the bolt it was looking for but it was $1.25 and had to be shipped so i just went to the store and found one myself

 

That's what I did. It appears it comes with the AC line. They dont have it separate.

 

ahh that sucks

just in case there is any uncertainty this is what i did



good luck

 

thanks