Sandman614's #expoenough Build

Retros are here but today a replacement set of 3five bulbs are going in as well as XB LED turn signals with a diode dynamics flasher unit.

 

Used 2 lengths of hydraulic hose to supply the tank. Thanks to Blkvoodoo

 

This looks like a good spot

Dammit, I need another fitting. Don't forget the little things.. I went to the parts stores too many times on this project.

Leak testing. Compressor pressure switch is 150psi, regulator is set to 90-95psi.


Finished!!!

Check out that plate Voz cut

 

Love the build. Your writeup on the towing trailer is great. Lots of hard work in your build, good pics and commentary. Look forward to your future posts.

 

Thanks. I just want everything on here the best I can do. It kinda sucks I have to take a lot of it off so I can get the frame replaced.

 

Any of you got your stock spindles around? Or anyone know where I can get them for a good price? I need a set.

 

Alignment numbers to get me home from Windrock TN

 

Cleaning up this rats nest. While the Blue Seas box is a nice product it just leaves something lacking for hanging relays and having extra wires running around.

 

Also realized my bumper was loose and upgraded the hardware. The old was rusted and had the shitty caged nuts. Grade8

 

I wonder how Philips lightbars are compared to Cree? Seems like Philips is the way to go acording to XenonDepot

Autofeel Led Light Bar 12" Work Light 72W rigid Driving Lamp 5D Flood Spot Combo Beam for Jeep SUV UTE 4x4 ATV UTB Golf 4WD Truck Pickup Off-Road with Mounting Brackets and Wiring Harness

http://www.amazon.com/Autofeel-PHILIPS-Light-Flood-Combo/dp/B010PX548O

 

So I just ordered this Philips LED bar from Amazon seller Autofeel. Will be doing a review.
Autofeel 22 Inch 120w PHILIPS LED Light Bar Flood Spot Combo Beam ATV SUV UTE
http://www.amazon.com/Autofeel-PHILIPS-Light-Flood-Combo/dp/B010PXI6B6

 

Just ordered new Idler pulleys and one that I hope will work for the tensioner. Read all of this thread on the FJ forum.
http://www.fjcruiserforums.com/forums/maintenance-tech/70698-idler-pulley-problem-solved-18.html

 

Are your pulleys making noise? How many miles?

 

Yea grinding/roaring after a day of jamming through mud holes.
150k-ish miles.

 

Did you order the buss man or get it through a TW member?

 

I ordered it and all the parts off waytekwire.com to make 2, already sold the other.

 

Even better, been looking around for a good wiring supply company. Thanks dude.

 

Here's my parts list, to make 2 boxes. I got my wire from Wirebarn.com
100, 39001 Gray Delphi Cable Seal# 12010293 Changed To 15324980
50, 31068 METRI-PACK 280 SERIES FEMALE 12129409 TERMINAL 16-14GA
100, 39000 Green Delphi Cable Seal 12015323 Changed to 15324982
50, 30069 METRI-PACK 280 SERIES FEMALE 12110847 TERMINAL 18-16GA
1, 533 CRIMPER SEALED METRI-PACK
10, 75660 ISO 280 MICRO RELAY 12V SPST
2, 46343 MINI FUSE AND MICRO RELAY RTMR PANEL BUSSMANN 15303-2-2-4
100, 39010 Green Delphi Cavity Plug Delphi # 12010300
2, 46691 1/4" Stud circuit breaker 80amp

Notes:
Input Terminal Rating: M6 input studs on bussed/partially bussed inputs: 80A max input on bussed fuse side, 80A max input on bussed relay side.
Output Terminal Rating: 2.8mm blade terminals (30A max per terminal)
Termination: Delphi Packard Metri-Pack® 280 Series terminals (sealed/tangless).* Delphi Packard 280 Series cavity plugs are installed where wires are not used.* Accepts #12-22 AWG wire sizes.

 

My LED bar is here @Autofeel
I need to make a bracket to mount it. On its feet it's way too tall.


With a custom bracket it will be as I want it to sit

 

Slowest progress ever...Bussmann style