What Have You Done To Your 2nd Gen Tacoma Today?

Finally got CB mounted and new antenna mount on

 

Oil is going to be black after ~1000 miles. Nothing to worry about it being black after only 3200, its still working just fine more than likely!

 

Perhaps.
Kitsap? I grew up in gig harbor on the peninsula. Now living in Tacoma.

 

USB charging ports.

 

Just finished doing my oil change, rear diff change, spark plug change. Washed it and detailed the interior. Traced wires and found out why my step lights weren't coming on after doing the all weather flooring mod. Loading up the grease gun now and gonna show these propeller zerks I mean business. Tomorrow after work I'll get my tires rotated and call this 60k maintenance complete. Been a productive weekend.

 

I've had my 2015 Sport almost two months now (1,000 miles!). Just finished the last of my 3 simple exterior mods: Plastiderp the badges; replace factory 847" antenna with a more reasonable 12" antenna; removed TRD sticker. So now I have my official "press photo" , you can see all three changes.

 

It's a good start

 

Wow i had 1k miles on my truck first weekend

 

I live 2.9 miles from work.

 

I just hit over 8k, had it since mid May

 

Loaded her up with a brand new kayak!

 

Where did you get this? I would like to mount something like this tot he back of the console.

 

Derping the badges... tailgate badges came out perfect, but got a tad impatient and tried to finish off the door badges without waiting for it to be completely dry and was not happy with the results so I peeled and am currently re-derping

 

I smoked a rock the size of a small dog. Rim is toast so is tire. Most amazing part......... The upper control arm contacted the inner fender! Check out the tear in the under coating.

To apologize I bought the girl an new set of boots (265/70/17 Duratracs)to go with the new rim (pricey) and changed all the driveline lube to AMSOil. Now for an alignment

 

I sprayed more of the park out from under my truck today, and wiped it down with some soapy water. It's water spotted, but mostly clean. I'll finish the job tomorrow.

I also cut off the excess strap on my Trail Toys Skid Plate, and zip tied the ~6" tail on each to the rest of the straps above to keep them from falling down and dragging behind the truck.

Finally I picked up the stuff to do an oil change. Just waiting on the truck, and Texas to cool down some before I dive into completing that project.

 

Got the kayak, yakima racks and every other yakima acessories possible it seems like
Perception pescador!

 

Two things....One, I really like that headache rack. Is that something ready made, or is it custom built? (And where can one be bought?) and two, how flippin' fast were you going to shove the UCA up that far into the fenderwell?

 

Awesome! What kind of roof rack is that

 

Yakima q tips, with yakima landing pads, have the yakima hullraiser kayak mount, and yakima track pads for my camper shell when I take my surf board too. Have the yakima swing daddy for the bikes in the back too lol

 

I looked for quite a while and saw so many of these that have big quality issues based on customer feedback. I got this at www.boatersland.com for about $21 plus shipping. It takes a 1.5" hole and I was surprised with the fact that it has blue LEDs. I obviously installed it without the rubber cap. I wired mine (and also put one in the console of my wife's Subaru Outback Sport) for always on and am still deciding if I want to put a switch inline. I measured the current draw with no load at less than 0.1mA...