1. Welcome to Tacoma World!

    You are currently viewing as a guest! To get full-access, you need to register for a FREE account.

    As a registered member, you’ll be able to:
    • Participate in all Tacoma discussion topics
    • Communicate privately with other Tacoma owners from around the world
    • Post your own photos in our Members Gallery
    • Access all special features of the site
    Quick Links: Weird - Dash Lights Backup camera output to aftermarket radio My 2010 Pre-Runner Build – A Collection of Essential Mods for Every New Tacoma SOLVED: Loose bearing chirping/squealing sound driving me insane! Where to get a steering knuckle spindle bolt? TRD 3rd Brake Light on The Tacoma!

2nd Gen 4x4 35s 3" Lift w/o BODY LIFT

Discussion in '2nd Gen. Tacomas (2005-2015)' started by Slimwood Shady, Jul 10, 2013.

Thread Status:
Not open for further replies.
Page 230 of 334
  1. Oct 29, 2015 at 7:28 PM
    #4581
    RockyMtnTRD

    #4581
    RockyMtnTRD Wanderlust.

    Joined:
    May 4, 2011
    Member:
    #56088
    Messages:
    6,557
    Gender:
    Male
    First Name:
    Noah
    Colorado
    Vehicle:
    '11 TRD OR
    hack job
    I would be interested for sure
     
    RockyMtnTRD, Oct 29, 2015
    #4581
  2. Oct 29, 2015 at 7:35 PM
    #4582
    InTheRough

    #4582
    InTheRough Well-Known Member

    Joined:
    Jan 29, 2013
    Member:
    #96438
    Messages:
    3,001
    Gender:
    Male
    First Name:
    Kolt
    Gig Harbor, WA
    Vehicle:
    '20 Tundra Platinum
    Rock Warrior wheels
    InTheRough, Oct 29, 2015
    #4582
  3. Oct 29, 2015 at 7:37 PM
    #4583
    InTheRough

    #4583
    InTheRough Well-Known Member

    Joined:
    Jan 29, 2013
    Member:
    #96438
    Messages:
    3,001
    Gender:
    Male
    First Name:
    Kolt
    Gig Harbor, WA
    Vehicle:
    '20 Tundra Platinum
    Rock Warrior wheels
    InTheRough, Oct 29, 2015
    #4583
  4. Oct 29, 2015 at 8:29 PM
    #4584
    dakotasyota

    #4584
    dakotasyota Just a Fringe of the Ging in your Minge

    Joined:
    Jun 11, 2013
    Member:
    #106099
    Messages:
    7,938
    Gender:
    Male
    First Name:
    Dakota
    Ellensburg, WA
    Vehicle:
    06 Access Cab, Manual, V6, 4x4, TRD Off-Road
    Total Chaos +2 LT w/ 2.5 x 8 Kings, 700 lb coils, Chevy 63s, BAMF Shock relocation, 12" King Smoothies, Locker Anytime Mod, 5% Tint All Around, 4xInnovations full skids, Custom Made Rock Sliders, 4xInnovations HC Rear Bumper w/ Tire Carrier, SOS Original Plate 2 Front Bumper, 130 w KC Slimlites, Homertaco Raptor Grill, Bestop Supertop, Smittybilt 9500 lb winch, Flowmaster 40 series, JVC deck w/ 12" Rockford Fosgate T1 in custom box, and lots more!!
    So much 37" peer pressure
     
    dakotasyota, Oct 29, 2015
    #4584
  5. Oct 29, 2015 at 8:38 PM
    #4585
    RockyMtnTRD

    #4585
    RockyMtnTRD Wanderlust.

    Joined:
    May 4, 2011
    Member:
    #56088
    Messages:
    6,557
    Gender:
    Male
    First Name:
    Noah
    Colorado
    Vehicle:
    '11 TRD OR
    hack job
    Sounds like you wanna go 37" :spy:
     
    RockyMtnTRD, Oct 29, 2015
    #4585
  6. Oct 29, 2015 at 8:39 PM
    #4586
    dakotasyota

    #4586
    dakotasyota Just a Fringe of the Ging in your Minge

    Joined:
    Jun 11, 2013
    Member:
    #106099
    Messages:
    7,938
    Gender:
    Male
    First Name:
    Dakota
    Ellensburg, WA
    Vehicle:
    06 Access Cab, Manual, V6, 4x4, TRD Off-Road
    Total Chaos +2 LT w/ 2.5 x 8 Kings, 700 lb coils, Chevy 63s, BAMF Shock relocation, 12" King Smoothies, Locker Anytime Mod, 5% Tint All Around, 4xInnovations full skids, Custom Made Rock Sliders, 4xInnovations HC Rear Bumper w/ Tire Carrier, SOS Original Plate 2 Front Bumper, 130 w KC Slimlites, Homertaco Raptor Grill, Bestop Supertop, Smittybilt 9500 lb winch, Flowmaster 40 series, JVC deck w/ 12" Rockford Fosgate T1 in custom box, and lots more!!
    I do but I don't
     
    dakotasyota, Oct 29, 2015
    #4586
  7. Oct 29, 2015 at 8:58 PM
    #4587
    SMKYTXN

    #4587
    SMKYTXN If it can't be overdone it's not worth doing Vendor

    Joined:
    Mar 11, 2011
    Member:
    #52810
    Messages:
    14,040
    Gender:
    Male
    First Name:
    Nathan
    Houston
    Vehicle:
    11, 4dr, TRD Sport, 6sp
    DCFB
    I doubt the flap would hold up to speed. That's meant to be a "wipe", like the seal on the bottom of your door.

    As for the trim that would fit a flare. I buy 500ft spools of the stuff so I can keep my price below the other folks that sell it.

    So yeah, I would need at least 10 if not 15 people to commit to a 20' order before I could justify placing an order. The lead time is pretty long as well. I think it took about six weeks for my last batch to come in. The company makes it as it's ordered. Not trying to talk anyone out of it by any means though. If someone wants to set up a group buy I'd be more than willing to go for it.
     
    SMKYTXN, Oct 29, 2015
    #4587
    TacoSTIG[QUOTED] and Bsheriff11[QUOTED] like this.
  8. Oct 30, 2015 at 4:35 AM
    #4588
    allmotorrex

    #4588
    allmotorrex Grove St. Fab

    Joined:
    Aug 29, 2010
    Member:
    #42441
    Messages:
    16,746
    Gender:
    Male
    First Name:
    Gideon
    Memphis 901
    Vehicle:
    08 SR5 4wd 2.7
    NWF crawlbox, 5.29s, rear Detriot, front Harrop, 37" SXIIs, 17x9" KMC Grenade Crawl beadlocks, Dirt King 3.5" LT kit with King shocks, Fox 12" smooth body RR, BAMF shock kit, AP 3" springs, ext. brake lines, custom 1 piece driveshaft with .135 wall tubeing, GSF front rock crawling bumper, GSF rear bumper, Relentless Fab ifs skid, BAMF k/o sliders, X2O 10K comp. winch, TP glass fenders, OKled 20"bar, EBS dimpled/slotted rotors, EBS green pads, custom K&N CAI, LCE headers, FM Super 44 w/h turn down, URD MAF, Spec clutch, LCE heavy flywheel, URD short shifter, TMPer M1 Abrams shift knob, Amsoil oil, Cobra 75wxst w/h 4' firestix, Grillcraft, FXR TRS, T1 eyelids, custom ADV Monster 60 lights, bed lights, speedo light mod, Glow Shift volt/oil pres gauges, Glow shift 2g column pod, Optima yellow tops dual battery setup w/h IBS system, Pioneer DEH-P7200HD head unit, Pioneer 600W 4ch & 350w 2ch amps for doors and sub, Wet Oakle covers
    Just depends on how big the wheel well is. 33s look big on a stock body, stock ride height Tacoma. 35s look big on a stock body, lifted Tacoma. 35s look right with 2" cut out of fenders. 37s look right with 3"-4" cut out of fenders. Run no fenders and 40s could look small.
     
    allmotorrex, Oct 30, 2015
    #4588
  9. Oct 30, 2015 at 5:12 AM
    #4589
    NYCO

    #4589
    NYCO go explore...

    Joined:
    Jul 27, 2010
    Member:
    #40842
    Messages:
    19,126
    Gender:
    Male
    First Name:
    bOb
    Colorado
    Vehicle:
    Blue Betty - '06 TRD OR
    dents & scratches
    couldn't we all :cookiemonster:
     
    NYCO, Oct 30, 2015
    #4589
  10. Oct 30, 2015 at 5:22 AM
    #4590
    InTheRough

    #4590
    InTheRough Well-Known Member

    Joined:
    Jan 29, 2013
    Member:
    #96438
    Messages:
    3,001
    Gender:
    Male
    First Name:
    Kolt
    Gig Harbor, WA
    Vehicle:
    '20 Tundra Platinum
    Rock Warrior wheels
    Wouldn't 37's rub pretty bad on a mid travel 2nd gen even with a CMC and removed pinchweld?
     
    InTheRough, Oct 30, 2015
    #4590
  11. Oct 30, 2015 at 5:26 AM
    #4591
    Large

    #4591
    Large Red

    Joined:
    Sep 10, 2011
    Member:
    #63268
    Messages:
    22,457
    Gender:
    Male
    yes .. you are better off removing the cab mounts completely and having new ones put on 2" behind the old ones, it's what I did and I plan to go to 37s eventually
     
    Large, Oct 30, 2015
    #4591
  12. Oct 30, 2015 at 5:29 AM
    #4592
    InTheRough

    #4592
    InTheRough Well-Known Member

    Joined:
    Jan 29, 2013
    Member:
    #96438
    Messages:
    3,001
    Gender:
    Male
    First Name:
    Kolt
    Gig Harbor, WA
    Vehicle:
    '20 Tundra Platinum
    Rock Warrior wheels
    I can understand dong that (although it sounds like a lot of work) but wouldn't it still rub pretty hard on the body when flexing? I wasn't sure what was behind the wheel well sheet metal before I cut my pinchweld but once I cut that off I realized that there is just a thin piece of metal and some carpet between my tires and the interior.
     
    InTheRough, Oct 30, 2015
    #4592
  13. Oct 30, 2015 at 5:35 AM
    #4593
    Large

    #4593
    Large Red

    Joined:
    Sep 10, 2011
    Member:
    #63268
    Messages:
    22,457
    Gender:
    Male
    It would still rub, there are numerous ways of dealing with the rubbing but I plan to have longer bumps .. maybe 1" or so, tub the fuck out of the wells (maybe remove them and have them re-welded on) and basically BFH it when she needs it
     
    Large, Oct 30, 2015
    #4593
  14. Oct 30, 2015 at 5:59 AM
    #4594
    AaronArf

    #4594
    AaronArf Well-Known Member

    Joined:
    Nov 12, 2011
    Member:
    #66926
    Messages:
    4,218
    Gender:
    Male
    First Name:
    Aaron
    VA Beach
    Vehicle:
    2023 LR OR DCSB
    I wouldn't even consider 37's if your not going to tub the firewall/inner fender (Edit: Which means relocating a ton of stuff under the hood).

    The amount of "BFH"ing required would destroy the sheet metal...aka leaks everywhere.
     
    Last edited: Oct 30, 2015
    AaronArf, Oct 30, 2015
    #4594
    dakotasyota likes this.
  15. Oct 30, 2015 at 6:15 AM
    #4595
    Large

    #4595
    Large Red

    Joined:
    Sep 10, 2011
    Member:
    #63268
    Messages:
    22,457
    Gender:
    Male
    I guess I should have said wells and firewall / fenders .. just thought it was implied. I am aware of what needs to be done, the cab mount relocate was I think the most pain in the dick part and it's already out of the way.
     
    Large, Oct 30, 2015
    #4595
  16. Oct 30, 2015 at 7:11 AM
    #4596
    Robertocritser

    #4596
    Robertocritser Well-Known Member

    Joined:
    Jul 21, 2010
    Member:
    #40524
    Messages:
    7,216
    Gender:
    Male
    First Name:
    Levi
    KY
    Vehicle:
    08 sport
    ATM6969420 series
    37 stuffed at full lock
    33b164a2b32bd4a68e88629c068f5d85_b8260e85c5b5678a31e58a89b82272082470b9ce.jpg

    Ride height
    26871ce94774616baaae23d00f8460c4_60833074407518db8dc1009df8afe9c0ce8e7499.jpg
    a12ce4f37032517f5d5dc441b27b85ff_9bd6ab8b3a6a59b53d4bfb9205d75a052e77f99e.jpg

    What I had to cut
    5fd2de9fc4a32396d92d9fcd24c1c491_59c44625ca36b23098474c7e4b9040553933cd1d.jpg

    All sealed up with new cab mount
    8e43f748cafbfc0fb1ad81f399b7f780_71034be575890fafde9ac50ce2e3e0fe5c518f01.jpg

    It takes a little work but if you know your way around with a grinder and welder it will take you a weekend to fit it.

    Also I had to use a bfh to prevent hitting the inner fenders. I still rub slightly in the right spot
     
    Robertocritser, Oct 30, 2015
    #4596
    ajohnson and 2ndGenJonny like this.
  17. Oct 30, 2015 at 7:14 AM
    #4597
    Robertocritser

    #4597
    Robertocritser Well-Known Member

    Joined:
    Jul 21, 2010
    Member:
    #40524
    Messages:
    7,216
    Gender:
    Male
    First Name:
    Levi
    KY
    Vehicle:
    08 sport
    ATM6969420 series
    Metal silicon sealer works very well, haven't had a leak since I did mine...
     
    Robertocritser, Oct 30, 2015
    #4597
  18. Oct 30, 2015 at 8:23 AM
    #4598
    allmotorrex

    #4598
    allmotorrex Grove St. Fab

    Joined:
    Aug 29, 2010
    Member:
    #42441
    Messages:
    16,746
    Gender:
    Male
    First Name:
    Gideon
    Memphis 901
    Vehicle:
    08 SR5 4wd 2.7
    NWF crawlbox, 5.29s, rear Detriot, front Harrop, 37" SXIIs, 17x9" KMC Grenade Crawl beadlocks, Dirt King 3.5" LT kit with King shocks, Fox 12" smooth body RR, BAMF shock kit, AP 3" springs, ext. brake lines, custom 1 piece driveshaft with .135 wall tubeing, GSF front rock crawling bumper, GSF rear bumper, Relentless Fab ifs skid, BAMF k/o sliders, X2O 10K comp. winch, TP glass fenders, OKled 20"bar, EBS dimpled/slotted rotors, EBS green pads, custom K&N CAI, LCE headers, FM Super 44 w/h turn down, URD MAF, Spec clutch, LCE heavy flywheel, URD short shifter, TMPer M1 Abrams shift knob, Amsoil oil, Cobra 75wxst w/h 4' firestix, Grillcraft, FXR TRS, T1 eyelids, custom ADV Monster 60 lights, bed lights, speedo light mod, Glow Shift volt/oil pres gauges, Glow shift 2g column pod, Optima yellow tops dual battery setup w/h IBS system, Pioneer DEH-P7200HD head unit, Pioneer 600W 4ch & 350w 2ch amps for doors and sub, Wet Oakle covers
    Good example of what it actually takes vs what people "think" it takes.
     
    allmotorrex, Oct 30, 2015
    #4598
    Blacktacoma23 likes this.
  19. Oct 30, 2015 at 11:06 AM
    #4599
    AaronArf

    #4599
    AaronArf Well-Known Member

    Joined:
    Nov 12, 2011
    Member:
    #66926
    Messages:
    4,218
    Gender:
    Male
    First Name:
    Aaron
    VA Beach
    Vehicle:
    2023 LR OR DCSB
    You do any high speed stuff? I know on my rig I'd have to cut the top inner fenders quite a bit to properly clear 37's for all wheeling scenarios.

    Seam seal works great - looks like you did yours the right way by cutting and welding in filler panels. Not going to achieve 37s without doing that or a BL.
     
    AaronArf, Oct 30, 2015
    #4599
  20. Oct 30, 2015 at 11:09 AM
    #4600
    Large

    #4600
    Large Red

    Joined:
    Sep 10, 2011
    Member:
    #63268
    Messages:
    22,457
    Gender:
    Male
    37 ? look like 36x10 intercos
     
    Large, Oct 30, 2015
    #4600
Page 230 of 334
Thread Status:
Not open for further replies.
To Top