Florida B.S. Thread

Do you even wheel?

 

Nahh dawg, my tires rub too much to wheel.

 

Taking off your fenders fixes it I learned here. Also if they don't rub at the mall they don't rub offroad bruh

 

Speaking of tire rub. The 285s rub in the front. Guess its time to chop the fenders.

 

Don't cut anything till you get your suspension situated.

 

needs more droop

 

Hopefully will have that situated by the end of the year.

 

Yeah that won't be happening on this truck. That out performs the front by far, so no need for more.

 

Just because we don't rock bounce, doesn't mean everything is a mall trip lol

 

Who rock bounces?

 

Crawlll

 

2014 4Runner SR5 2WD, she is stuck between 4 and 6" I think she really wants 6 and 35s but only fabtech makes a drop bracket lift, maxtrac doesn't make a 6" spindle. Should we just run a 3" icon on 33s? I need opinions

 

3" ADS or Kings and 35's!

 

3" on 33s then move up if she wants

 

I like it, 3 inch to start then see what we can do from there. Thanks guys

 

im over here running 315s and barely touching the cab mount XD

this is awesome

why not just run the maxtrac spindles and adjustable coilovers? then you can have the ability to do between 4" and 7" with the coilovers added. I have my ICONs right about 0.5"-1" or so of lift up front (maybe, I dunno lol), 4" from the maxtrac spindles, then add in the 2" from just the tires alone, then add the weight of my bumper and winch up front and I have about 5.5-6" of lift up front. But thats just an estimate of how much im thinking I have lol, I never measured my stock height before anything haha, im somewhere around 5-6" of lift...I think lol

 

What about the rear springs? Longer?

 

I honestly have no idea what exactly is a good setup for the runners in the rear lol, Ive never really looked into it, im only used to looking at leafsprings and not coils for lift. But looking at toytec, and im not sure if this would be a good setup, but looks like there's a 2 1/2" coil upgrade then you can throw on a 1.5" spacer they have to make 4" for the rear. But as I said, im not too knowledgeable on 4runners and exactly how the suspension sits. Like i know on the tacos the front sits lower than the rear but im not sure if thats how the runners sit or not. But yes, youll want longer springs to give you lift

 

@TAZ2014Taco ^^^ this. Alfuh beat me to it. I have the Maxtracs + 5100's set @ 1.75 + 1/4" Toytec top plate spacers totaling a little over 6" & still have one more notch to go if i want for another. 75".

 

Didn't even think about spacers with coils lol that'll work, I just really did not want to do a drop bracket lift