Wheel Bearings/Hubs 4x4 & 4x2 PreRunner for sale *complete* save $$ CUSTOM BUILT AVAILABLE

Just curious if my hubs are in the next shipment?

 

Ok here are the photos I promised! Very satisfied customer

This is how they looked upon arrival


I decided to paint some areas to prevent rust and corrosion and to match the rest of my suspension since I had some time while waiting for wheels and tires to arrive.


Heres how it looked before rotor install, really glad at this point that i decided to paint them.


After Rotors and calipers installed. I also wire brushed my calipers then put a fresh coat of high temp paint ( might as well when you have the time )


Another angle of the ARP stud length


Wheels and tires finally arrive! Cooper Discoverer STT Pro ( 285/70/17 ) on a Mickey Thompson classic version. No rubbing at all


Bought some new Gorilla Lug Nuts open end style, little dab of grease on the threads and set them all to 87lbs of torque. I was expecting more thread to be showing but these actually look really clean at full length IMO


Paired with a brass .45 valve stem cap I am very happy with the brass/black look






Thanks again for offering a great product at a great price, shipping was fast as well!

 

bolts are in, time to work

 

That is BADASS! looks great!

 

so if i would order 2 bearing/hub assemblies for the 4x2 and wanted the 1/2" longer studs how much extra would it be?

would i need to get new lug nuts? i use an aftermarket rim with aftermarket lugs.

 

a pair of 4x4 hubs with 1/2" longer studs would be $385 shipped.

 

sorry just saw this, Pm me your info and I'll tell you where your order is.

 

sorry i edited my post right as you replied

im looking at the 4x2

 

Actually just got the shipping and tracking info in my email. Thanks again! Can't wait to get these on!

 

awesome!

 

I think it's time for me to build a pair of these for my truck. ARP's look great with the wheel/tire combo

 

$550 + $55 for the 1/2" longer studs

 

busy week. I am shipping a few orders tomorrow morning, tracking #'s have been PM'd/emailed.

I will be finishing the remaining orders this weekend.

 

are all prerunner hubs going to look like this?

just wondering if this is what i should expect on arrival?

im not saying there is something wrong with it because what ive read is that it has to be pinched right here for certain reasons but i just want to be sure that this is supposed to be like this so that when i get my package i can know what to expect.

i also dont know as much about these wheel bearing assemblies as some.


why is is supposed to be pinched here?

 

Sorry to bother. Just got around to installing my new hubs. Can someone tell me the torque spec for the big nut that's on the end of the CV. i'm pretty sure its important.....lol. I have searched for about a half hour without success. Thanks

 

173 foot pounds on the 35mm nut!

 

His bearing was defective and the flange did not push all the way through, that is why you see a few more threads showing.

this is how the properly seated hub and crease mark should look

 

properly staked

 

I've done a lot of the Prerunners in the past two years that I've provided this service. I do a few every week and enjoy building them. Great Timken parts with great OEM Toyota parts--can't go wrong. I am still bugging Dorman for an aftermarket hub flange to save you guys money!