1. Welcome to Tacoma World!

    You are currently viewing as a guest! To get full-access, you need to register for a FREE account.

    As a registered member, you’ll be able to:
    • Participate in all Tacoma discussion topics
    • Communicate privately with other Tacoma owners from around the world
    • Post your own photos in our Members Gallery
    • Access all special features of the site
    Quick Links: Which cam lube to use for rebuild? Anyone use one of those steps that you attach the door latch? Issues? Whiteline Bushings, TC Alignment Tabs, SPC UCA's and Home Alignment RTT on hard cap Axcess aswc-1 installation into a alpine head unit. Hooke Road steel rear bumper, who here has one?

Leveling kit

Discussion in '2nd Gen. Tacomas (2005-2015)' started by dtay4197, Nov 6, 2015.

Page 2 of 3
  1. Nov 6, 2015 at 9:27 PM
    #21
    dtay4197

    #21
    dtay4197 [OP] Well-Known Member

    Joined:
    Oct 21, 2015
    Member:
    #167291
    Messages:
    48
    Gender:
    Male
    First Name:
    Dustin
    Vehicle:
    silver 2007 trd offroad
    2.5 bilstiens, colormorph retrofit halos and fogs, urd maf cal, Urd tcai, 20x12 mo962, 33x12.50x20 iron man mts
    I already have 2" wheels spacers on mine to give it a little stance with the leveling kit but I might just leave spacers on till I get the 5100s
     
    dtay4197, Nov 6, 2015
    #21
  2. Nov 6, 2015 at 9:27 PM
    #22
    dtay4197

    #22
    dtay4197 [OP] Well-Known Member

    Joined:
    Oct 21, 2015
    Member:
    #167291
    Messages:
    48
    Gender:
    Male
    First Name:
    Dustin
    Vehicle:
    silver 2007 trd offroad
    2.5 bilstiens, colormorph retrofit halos and fogs, urd maf cal, Urd tcai, 20x12 mo962, 33x12.50x20 iron man mts
    Like 5100s
     
    dtay4197, Nov 6, 2015
    #22
  3. Nov 6, 2015 at 9:27 PM
    #23
    Kieran

    #23
    Kieran Friendly Neighbourhood Canadian

    Joined:
    Jan 4, 2015
    Member:
    #145592
    Messages:
    100
    Gender:
    Male
    Toronto
    Vehicle:
    09 Access Cab V6 TRD OffRoad
    None yet.
    the temporary thing... i did see that... then i clicked on the link for the $65 spacers... i was trying to suggest skipping step A and going right to Z...
     
    Kieran, Nov 6, 2015
    #23
  4. Nov 6, 2015 at 9:28 PM
    #24
    ZachPrerunner

    #24
    ZachPrerunner Sometimes she goes, sometimes it doesn’t

    Joined:
    Jul 7, 2015
    Member:
    #158942
    Messages:
    2,963
    Gender:
    Male
    Southeast TN
    Vehicle:
    ‘07 TRD Offroad / ‘19 TRD Offroad 4x4
    Oh the wheel spacers are fine even with the lift. I was talking about the coil spacers.
     
    ZachPrerunner, Nov 6, 2015
    #24
  5. Nov 6, 2015 at 9:29 PM
    #25
    TommyG

    #25
    TommyG Around

    Joined:
    Jul 25, 2010
    Member:
    #40725
    Messages:
    2,283
    Gender:
    Male
    First Name:
    Grouch
    MELTING POT
    Vehicle:
    21 MAX
    No mods
    Or coilovers. ( adjustable ride height).
     
    TommyG, Nov 6, 2015
    #25
  6. Nov 6, 2015 at 9:31 PM
    #26
    dtay4197

    #26
    dtay4197 [OP] Well-Known Member

    Joined:
    Oct 21, 2015
    Member:
    #167291
    Messages:
    48
    Gender:
    Male
    First Name:
    Dustin
    Vehicle:
    silver 2007 trd offroad
    2.5 bilstiens, colormorph retrofit halos and fogs, urd maf cal, Urd tcai, 20x12 mo962, 33x12.50x20 iron man mts
    Right. I was just saying I was getting all excited on getting the leveling kit so I went ahead and got spacers and put them on. But I think I will wait and just get 5100s do I have to get new UCA's with 5100s or is that only if I where to max them out?
     
    dtay4197, Nov 6, 2015
    #26
  7. Nov 6, 2015 at 9:31 PM
    #27
    ZachPrerunner

    #27
    ZachPrerunner Sometimes she goes, sometimes it doesn’t

    Joined:
    Jul 7, 2015
    Member:
    #158942
    Messages:
    2,963
    Gender:
    Male
    Southeast TN
    Vehicle:
    ‘07 TRD Offroad / ‘19 TRD Offroad 4x4
    What height are you wanting to achieve OP? If you're wanting 3" or above, you're going to have to purchase some new upper control arms. If you keep it below 3", coilovers or new springs will produce a "smoother" ride. I wouldn't place the 5100's higher than the 1.75, otherwise you'll have a rough ride.
     
    ZachPrerunner, Nov 6, 2015
    #27
  8. Nov 6, 2015 at 9:32 PM
    #28
    ZachPrerunner

    #28
    ZachPrerunner Sometimes she goes, sometimes it doesn’t

    Joined:
    Jul 7, 2015
    Member:
    #158942
    Messages:
    2,963
    Gender:
    Male
    Southeast TN
    Vehicle:
    ‘07 TRD Offroad / ‘19 TRD Offroad 4x4
    You should be okay with stock UCA's with the 5100's. The ride quality isn't that great at the maxed height, so I would place them on the third notch (1.75").
     
    ZachPrerunner, Nov 6, 2015
    #28
    dtay4197[QUOTED][OP] likes this.
  9. Nov 6, 2015 at 9:34 PM
    #29
    dtay4197

    #29
    dtay4197 [OP] Well-Known Member

    Joined:
    Oct 21, 2015
    Member:
    #167291
    Messages:
    48
    Gender:
    Male
    First Name:
    Dustin
    Vehicle:
    silver 2007 trd offroad
    2.5 bilstiens, colormorph retrofit halos and fogs, urd maf cal, Urd tcai, 20x12 mo962, 33x12.50x20 iron man mts
    Really all km trying to achieve is getting my nose off the damn ground lol I hate the way it sits and would love for it to sit level. Right now I'm on a 200 dollar budget so maybe I can get adjustable 5100s for now then maybe rear 5100s at Christmas time
     
    dtay4197, Nov 6, 2015
    #29
  10. Nov 6, 2015 at 9:40 PM
    #30
    ZachPrerunner

    #30
    ZachPrerunner Sometimes she goes, sometimes it doesn’t

    Joined:
    Jul 7, 2015
    Member:
    #158942
    Messages:
    2,963
    Gender:
    Male
    Southeast TN
    Vehicle:
    ‘07 TRD Offroad / ‘19 TRD Offroad 4x4
    Alright, so you're wanting to level the truck correct? I would place the 5100's on the .85 notch then, especially if you only have a three leaf pack (pre-TSB). The rear 5100's aren't adjustable, so the back height will have to be achieved through other means. If you have a four leaf pack, the 1.75" setting will give you a better "level". Here's a picture of my truck with the shocks set at .85 with the 1" block in the rear.

    image.jpg
    image.jpg
     
    ZachPrerunner, Nov 6, 2015
    #30
  11. Nov 6, 2015 at 9:42 PM
    #31
    dtay4197

    #31
    dtay4197 [OP] Well-Known Member

    Joined:
    Oct 21, 2015
    Member:
    #167291
    Messages:
    48
    Gender:
    Male
    First Name:
    Dustin
    Vehicle:
    silver 2007 trd offroad
    2.5 bilstiens, colormorph retrofit halos and fogs, urd maf cal, Urd tcai, 20x12 mo962, 33x12.50x20 iron man mts
    I want my nose to be a tad higher so could I still achieve that with 5100s in front and stock rear end. No aal or blocks.
     
    dtay4197, Nov 6, 2015
    #31
  12. Nov 6, 2015 at 9:45 PM
    #32
    ZachPrerunner

    #32
    ZachPrerunner Sometimes she goes, sometimes it doesn’t

    Joined:
    Jul 7, 2015
    Member:
    #158942
    Messages:
    2,963
    Gender:
    Male
    Southeast TN
    Vehicle:
    ‘07 TRD Offroad / ‘19 TRD Offroad 4x4
    Yeah you can raise the shocks to the next notch which would be 1.75". The best way to tell what it would look like is to measure the height of the current setup. Measure from the tip of the fender flare down to the center of the hub. Apply 1.75 inches to that measurement and you'll be able to get an idea of what it'll look like. But to answer your question, you can have the nose sit higher without having to modify the rear.
     
    ZachPrerunner, Nov 6, 2015
    #32
  13. Nov 6, 2015 at 9:47 PM
    #33
    dtay4197

    #33
    dtay4197 [OP] Well-Known Member

    Joined:
    Oct 21, 2015
    Member:
    #167291
    Messages:
    48
    Gender:
    Male
    First Name:
    Dustin
    Vehicle:
    silver 2007 trd offroad
    2.5 bilstiens, colormorph retrofit halos and fogs, urd maf cal, Urd tcai, 20x12 mo962, 33x12.50x20 iron man mts
    Okay I think I'll just spend a little more and get just the front 5100s for now
     
    dtay4197, Nov 6, 2015
    #33
    ZachPrerunner[QUOTED] likes this.
  14. Nov 6, 2015 at 9:47 PM
    #34
    ZachPrerunner

    #34
    ZachPrerunner Sometimes she goes, sometimes it doesn’t

    Joined:
    Jul 7, 2015
    Member:
    #158942
    Messages:
    2,963
    Gender:
    Male
    Southeast TN
    Vehicle:
    ‘07 TRD Offroad / ‘19 TRD Offroad 4x4
    Smart choice :thumbsup:
     
    ZachPrerunner, Nov 6, 2015
    #34
  15. Nov 6, 2015 at 10:16 PM
    #35
    ultrabattler

    #35
    ultrabattler Well-Known Member

    Joined:
    Jan 14, 2015
    Member:
    #146342
    Messages:
    272
    Gender:
    Male
    Denver, CO
    Vehicle:
    '15 TRD Offroad dlcb
    Fox 2.5 w/ resi. HS AAL Pack. Stickers for extra HP.
    I got the front 5100s too. I wish there was a setting between .85 and 1.75. I feel that is where my perfect level with the TSB leafs in the back.
     
    ultrabattler, Nov 6, 2015
    #35
  16. Nov 7, 2015 at 12:05 AM
    #36
    Fitz235

    #36
    Fitz235 Well-Known Member

    Joined:
    Mar 17, 2015
    Member:
    #151142
    Messages:
    2,153
    Gender:
    Male
    First Name:
    Rob
    New Hampshire
    Vehicle:
    Black '22 DCSB TRD Offroad 4WD
    - TRD T4R Pro Wheels - TRD Lift Kit - TRD Skid Plate - 265/70/17 Toyo Open Country 3's - OEM Bed Lights - OEM Bed mat - Alpharex Tail Lights - TacomaBeast LED Interior Lights - Green Lane Offroad Aluminum Sliders - Place Holder for More Bad Financial Decisions...
    If you leave it that way, make sure you adjust your head lights. You will likely be getting flashed by other drivers, because your lights will now be aimed higher.

    Also, if you do want to go to 3", that is best done with new coils. As others have said, the 5100's @ the 2.5 setting, supposedly ride pretty rough. I have mine @ the 1.75" setting, and I would describe the ride as "firm", but not rough. I actually like it the way it is, but would think that any firmer would be too much.
     
    Last edited: Nov 7, 2015
    Fitz235, Nov 7, 2015
    #36
  17. Nov 7, 2015 at 12:11 AM
    #37
    Fitz235

    #37
    Fitz235 Well-Known Member

    Joined:
    Mar 17, 2015
    Member:
    #151142
    Messages:
    2,153
    Gender:
    Male
    First Name:
    Rob
    New Hampshire
    Vehicle:
    Black '22 DCSB TRD Offroad 4WD
    - TRD T4R Pro Wheels - TRD Lift Kit - TRD Skid Plate - 265/70/17 Toyo Open Country 3's - OEM Bed Lights - OEM Bed mat - Alpharex Tail Lights - TacomaBeast LED Interior Lights - Green Lane Offroad Aluminum Sliders - Place Holder for More Bad Financial Decisions...
    If you get the Dakars now, you should be able to get reimbursed from Toyota.
     
    Fitz235, Nov 7, 2015
    #37
    ZachPrerunner[QUOTED] likes this.
  18. Nov 7, 2015 at 3:52 AM
    #38
    dtay4197

    #38
    dtay4197 [OP] Well-Known Member

    Joined:
    Oct 21, 2015
    Member:
    #167291
    Messages:
    48
    Gender:
    Male
    First Name:
    Dustin
    Vehicle:
    silver 2007 trd offroad
    2.5 bilstiens, colormorph retrofit halos and fogs, urd maf cal, Urd tcai, 20x12 mo962, 33x12.50x20 iron man mts
    How hard are they to adjust?
     
    dtay4197, Nov 7, 2015
    #38
  19. Nov 7, 2015 at 4:02 AM
    #39
    Fitz235

    #39
    Fitz235 Well-Known Member

    Joined:
    Mar 17, 2015
    Member:
    #151142
    Messages:
    2,153
    Gender:
    Male
    First Name:
    Rob
    New Hampshire
    Vehicle:
    Black '22 DCSB TRD Offroad 4WD
    - TRD T4R Pro Wheels - TRD Lift Kit - TRD Skid Plate - 265/70/17 Toyo Open Country 3's - OEM Bed Lights - OEM Bed mat - Alpharex Tail Lights - TacomaBeast LED Interior Lights - Green Lane Offroad Aluminum Sliders - Place Holder for More Bad Financial Decisions...
    They can't be adjusted once they're installed. There is a snap ring that holds the spring perch up, with four grooves in the body of the shock.

    To adjust them, you would need to take the assembly back out. You may be able to adjust them without completely taking them out, but at the very least, a spring compressor would be involved. They are adjustable, but not like a standard adjustable coilover.
     
    Last edited: Nov 7, 2015
    Fitz235, Nov 7, 2015
    #39
  20. Nov 7, 2015 at 4:11 AM
    #40
    dtay4197

    #40
    dtay4197 [OP] Well-Known Member

    Joined:
    Oct 21, 2015
    Member:
    #167291
    Messages:
    48
    Gender:
    Male
    First Name:
    Dustin
    Vehicle:
    silver 2007 trd offroad
    2.5 bilstiens, colormorph retrofit halos and fogs, urd maf cal, Urd tcai, 20x12 mo962, 33x12.50x20 iron man mts
    Can they be installed without a compressor?
     
    dtay4197, Nov 7, 2015
    #40
Page 2 of 3

Products Discussed in

Supreme Suspensions - 3" Front Leveling Kit for Toyota Tacoma 4Runner FJ Cruiser 2WD 4WD - T6 Billet Aluminum Front Lift Strut Spacers
$44.89
To Top