Oahu Members Thread

P0031 HO2S Heater Control Circuit Low (Bank 1 Sensor 1)
P0051 HO2S Heater Control Circuit Low (Bank 2 Sensor 1)
Don't know what that means. Maybe did something to the lines for the heater?

 

OUCH!

 

Word.. Only two 2x's slider'ed that boulder that day

Yeah, he had a good point, but if you are getting sliders to protect the body, then might as well go all the way lol

 

I have no idea how I've gone this long without sliders.....should probably get some.....



someone tell the pelfrey's to make 1st gen kickup/out sliders

 

Finished up my rack today!

That's crazy! Looks like if you were within 30' of that tree, you would have been SOL!

 

Looks good!

 

Ya I find it hard to believe Both O2 sensors going out one time with less then 10,000 miles
also truck drives fine its just that Break Buster Pump when I start up don't hear it kicking on
at all I think that's going to be ware I start

 

I've been to Erma's before when I first got my truck and drove on the sand to test out my 4x4. Is it illegal to "off-road" on sand there?

Also, there's no way to get past that last part where the cars are lined up right? that looked straight up illegal so I didn't try

 

No driving on sand at any beach is aloud on Oahu. Mike , Iven and I found that out the hard way at Ermas.
But I drove across it twice yesterday. Good fun too.

 

haha yeah I figured so thx for clarifying that

 

I'm leaving now to meet up with the guys at the warehouse to pick up my bumpah. See you guys there

 

What I was more thinking about was if something hit the slider only but not the chassis itself, it could put a twist in the chassis... But at the same time you wouldn't want the protection to break off if it was actively protecting you from something more severe... But as the customer, you are entitled to request it done however you want... Can you measure the thickness of the plates that have the holes in them? The ones that are to be welded to the frame... With calipers preferably but old fashioned ruler or tape will do... I need to know the thickness of that plate to set up some demo plates in the various positions we will encounter during the fit up... That was I can get the welder set for that job

 

Will do...just guessing right now but its probably 1/8" plate...but will confirm when i get home

 

So my RTT has been sitting in my garage for a month. Is there any place I could use it around the island? I've heard most camping spots aren't located in an area were you can park your vehicle. Is this true?

 

LT

 

Peacock flats...

 

No its thicker than that... I'm gonna go with 3/16 to maybe 1/4

 

Is that the only place on the island?

 

Peacock flats and Bellows for actual camp sites which you would be able to pull right up to your campsite. Kaena point (if you got the pass and you are fishing).. Or some random beach which is definitely at your own risk if you go alone..

 

Just realized that after i looked at my pics....but will confirm when i get home