A little puzzeled here.. maybe you can figure it out

I get in my truck this morning to run and get me my cup of coffee from 7-11. and i go to turn my heat on but no air is blowing through the vents. Now i can feel a little bit of air but not much, also i can still switch from vents to floor to defrost.etc... and change from hot to cold just. As i said i could feel a little bit of air but its only when i get up to about 60mph seems to come thru a bit but when i stop no air at all is blowing through. So damn confused. Any suggestions?

 

possibility since i went out playing in the the storm from that wicked nor-easter over my way. had to get sum mud on the tires.

and by the fan blowing you are talking about? and where is the vent control located? thanks

 

nope dont really hear nothing out of it

 

correct nothing what so ever.

 

any of you know where i can find the fuse diagrams for these trucks. think it might be a fuse??

 

yep just realized that tool the fuse out and put it back in now everthing is working fine. dont understand that but hey im not complaining it works! thanks guys

 

Sometimes thats all it takes, maybe the fuse was installed backwards??

 

It could be something simple, do you have your air recirculation button off? When you have it off it doesn't blow air as fast, it is located on the bottom right between the temp nob and the nob to control where the air will go. It has a image of a car on the button and an arrow inside the image of the car, this location is for 2nd gen. A little light will light up when it's on or pushed in.

I don't really know just thought I would throw that out there, I haven't used the heat in a long time so I don't know if it blows out faster with the button pushed in, but I know it does with the a/c on.

 

98tacoma27
^^^^^^^^
Relax!
I don't do that, that often!

 

did you try the recirc.button or a/c botton ?