What Have You Done To Your 2nd Gen Tacoma Today?

Installed the variable interval wiper switch.

 

Added some much needed Avenged Sevenfold vinyl love:


...and replaced both climate control bulbs!

 

My second favorite mod, first was the bed mounted bottle opener. Welcome to TW, kiss your spare change goodbye.

 

New tires! Got the truck a week ago, installed the new tires at work.. 265/70/17 BFG T/A K02.. No rubbing at stock height without mud flaps..

 

Welcome! Looks good and good luck with the new truck.

 

Took possession



Love this '12 TRD Sport CCLB
Still trying to figure out how to program the Homelink garage door opener, and program the radio stations and Bass/treble levels, etc.

But already trying to figure out first mods.

 

rocking the old school white letters out i see
jk

 

rocking the old school white letters out i see
jk

 

Installed Matt Gecko's bed light and it's awesome.

 

Look in your owners manual. Nice truck!

 

Added swing case toolbox

 

Have pics of the process? What'd you do to keep the sunglass holders from opening? How much cutting to the back of the center console to get it to fit? Thanks!

 

Also added door sill protectors

 

I went and got in one, and looked at it, and the salesman asked me what I thought, I told him I thought I made a good decision in August when I bought my 15!

 

Performed the rear axle breather relocation mod.

 

I sat in one while having my '15 serviced once. Couldn't see the upgrade.

My boss rented a 2016 and I got in and started it up. Wasn't impressed there either. Happy with my modded '15.

 

Here is the back of mine after I did some cutting.

 

Yeah he didn't like my comment about a bucket of ugly getting poured all over the front end, and it running under the hood.

 

The switches don't require enough force to make the door open so I didn't do anything to the doors. The back of the console required quite a bit of cutting but nothing too crazy. You can see it in Bender581's post. I cut about the same amount as he did.

 

Here are some photos from my install. If you leave the majority of the overhead console in place, it will still latch. I ended up cutting a bit more of my sunglasses holder than most people do to gain more clearance for the switch posts.