What Have You Done To Your 2nd Gen Tacoma Today?

thinking . . . . . . . .

 

prep for winter...rain x all windows and mirrors, dow corning silicone grease lightly applied to all rubber door and cap window seals, graphite powder in all the locks, check all fluids and fill washer tank up with -20 juice, winter wiper blades installed. good to go

 

I went 1.75 and it looks good IMHO...

 

What are this inserts good for?. They are in both sides behind front fender.

 

^They protect the front suspension somewhat in a frontal collision. Depending on the design, some plate bumpers require you to remove those inserts.

 

Ran the truck through a wash, so I can finally take some photos of the Duratracs I put on two weeks ago... They are 265/75-16 Load Range C

 

Added a subtle Alabama sticker to the back glass and picked up my new sectional for the house

 

i have found facyory plugs run way better then ngk. you might be able to run denso high end units.

 

2 1/2" front 2" rear lift. looked stock but handled great

 

Not me but I was here
@xweslingx and @Timbo89 got put new cam tabs in

 

Denso iridium long-life plugs work just fine in my truck. I used

$56 SK20HR11 ---- IRIDIUM PLATINUM power pack Spark Plugs -- # 3421 ----- 6 PCS NEW

SK20HR11, same P/N that comes with the TRD supercharger kit. What iridium NGK P/N did you use? Maybe they were the wrong heat range.

 

PM (excuse me, "conversation", still don't like this change on the new site format) sent.

 

I believe he mentioned NGK iridiums . only issue I saw with NGK is they are not specific enough. They cover a couple plugs with one plug. Denso is very very specific.

 

Did some light wheelin in the 5 lug and got my shovel mounted

 

Finally made some mounts for my jack. Came out super clean.

 

I got the back wet okole's installed tonight once we got back From the mountains.

I'm hopin to see switches next week.

 

Bought to hall stuff in my shell, but after some new paint I think its too nice to leave in the truck bed.

 

80 degrees here in SoCal. Perfect day for full detail. The coating is holding great so just a wash. Undercarriage washed and detailed with 303. 5 1/2 years old and 60k, still loking like new

 

Made some fender liners out of vinyl garage flooring. I removed my stock fender liners when i cut my fenders but mud and crap was getting into places you never thought possible. This idea came from NYCO's build.

 

I finally got around to wiring up my backup light pods. For now they're only wired to the switch, I anticipate later wiring the relay in parallel to the factory reverse lights so these can either be on, or on whenever the truck is in reverse.