What Have You Done To Your 3rd Gen Today?

Ha, it's pretty sketchy at best. the lever goes to two rods, one clamps onto the gas pedal, one onto the brake pedal. So, when you push the lever forward, it pushes in the brake pedal, when you pull the lever towards you, it pushes the gas. Most all hand controls, even permanent installations are mechanical with a similar function, I'm hoping to get a digital acceleration ring that is all the way around the rear of the steering wheel, that you pull towards you with your finger tips to accelerate. Unfortunately, will still have some sort of mechanical brake lever I have to push as insurance companies, etc. haven't allowed digital braking to go mainstream for hand controls. Just getting the digital acceleration is going to be a challenge, insurance companies haven't figured out to monetize the tech for their advantage yet = hard to get.

 

Yeah, that's why you make his mom ride back there. HA!

I'm kinda new to the forum. Still waiting on my 2016 Tacoma TRD Sport Access Cab. Just found out ship date is January 8th.

 

Butler Toyota; I'm just down the road from you in Warner Robins. I got mine at Lowe Toyota.

 

Completed the lift + air dam delete

 

dam that sucks! hope your neck and back feel ok! you insured against uninsured motorist?

 

so sick!!

 

nice! I didn't know you could do that! can you do pretty much anything?

 

So clean!

How did you yellow out the fog lamps? Did you purchase the actual lamps or did you use film tint? I tried using the film tint a couple weeks back, but because the lens is concave I couldn't get the edges to keep from bunching up.

 

best mod ive seen!

 

This is the "Brand" product: http://www.bpfabricating.com/products/tacoma-recovery-tow-hook
This is the "Generic" product: http://www.ebay.com/itm/05-16-Tacoma-Recovery-Tow-Hook-with-Shackle-/301638558409

I went with Generic and now have to use spacers. Not a big deal but I bet that would be a non issue with the BP Fabricating product.

 

Thanks for checking! Sweet. My bike will fit AND I'm not concerned about the lower ceiling height due to the moon-roof

 

Plasticolor 11x19 mud flaps. Way better than the OEM ones that are stiff and break off. Now on the 2016's most don't have mud flaps from the factory so it was an easy add. $40

 

I used the lamin-x film. Installed it on a warm day so it was pliable (you can use a heat gun or hair dryer too). I started from the middle of the lamp and slowly worked around it.

 

I have the 88p, you'll love it.

 

Where did you get them from? Can you please post front and side pictures of your truck with them on?

 

Very nice looking ride. Tasteful with not too much exageration!

 

Thank you. It's exactly what I was going for.

 

thanks. I can't take credit for it, got the idea from TW

 

If you have a chance can you post a picture with the amber lamps on at night? If it's not too much trouble.

 

Thanks man. I just got a email from Amazon stating it is on the way. I did a days worth of research and feel I made the right choice along with the tool bag to store it in.